Adobe Audience Manager

Hello - we've come across the same question a few times from the business and our Adobe Target admins. We're seeking to do some onsite personalization via Adobe Target, using 3p audiences we built using an Audience Marketplace data provider.  Given that these are 3p cookie pools, devices have already qualified for the segment.  So when they land on our website for the first time, will they see the personalized experience (first page) or would need to take an action on our website to qualify?  Many thanks-   Marc K.

Hello, I wanted to understand implications to a segment's population when an underlying trait's qualified profiles are either updated or deleted using d_sid or d_unsid parameters. For example, if I use "d_unsid" in my ingestion file to remove 5 UUIDS from my trait then -  1. How will the trait population will be affected in terms of Unique Trait Realization and Total Trait Population.2. Assuming there is a segment built using just the above trait, how it's Real-Time Segment Population and Total Segment Population will be affected after file ingestion. @shweta_singh @ankita_sodhi @varun_kalra Thanks,Har**bleep**

Hello,I've pulled over an "exclude bots" segment from analytics into audience manager.   Is it correct to assume for my segments in audience manager I would use the rule "and" to suppress any bot traffic from my segments?

Has anyone successfully done file based offline ID sync (not for PBD) recently?If yes, could you share the exact steps and settings for both the data sources?We have an ID (say hashed email) that's available on website front end for ID sync (data source 1). But, the offline data file will be uploaded using a different customer ID (data source 2). We'd like to send an offline ID sync file or match table later on to AAM to tell that both IDs belong to the same person.We uploaded file like this: adobe_id_datasource1_datasource2_<timestamp>.sync So far, we have configured both the data sources as cross device and uploaded the file to the s3.But, while looking up the trait and segment qualifications using the d_cts=2 flag, we do not see that the hashed email ID (data source 1) qualifies for the traits and segments. Thanks,Varun Kalra

Hello,  According to this link, I'm trying to understand why there is not AAM signals from AA on c_state, c_long and c_latitude on Data Signals dashboard.  Is there any additional settings that should be done in order to see this variables?  Best, 

Hey guys, can someone tell me connection between analytics and the audience manager by publishing/sharing segments from analytics to the audience manager? The lookback period in analytics by publishing segments is maximum 120 days. I have shared this segment from Analytics to the Audience Manager. Now i can see this segment in the audience manager. But in the audience manager i can also see, the experation is automatically set for 16 days, but why? I want to collect as many users as possible, this is why i set the lookback period to 120 in Adobe Analytics, so i thought this segment includes user from the last 120 days. but how should this work, if it expires after 16 days in the audience manager? Thank you 🙂 Segment in Adobe Analytics: The Trait of this published Segment in the Audience Manager:     

I hope I'm posting the right section.So our client is using Adobe Analytics and Audience Manager.Is it possible to dynamically  generate and export audiences and their attributes (such as product pages viewed) in order to run dynamic retargeting campaigns with Google Ads?Dynamically meaning I will not create an audience for each product page, but one larger audience where individual parameters can be sent to Google to run dynamic ads.Mind the client will not accept to install Google pixel on the website. ThanksAndrea 

Hi Everyone, I am unable to track down any documentation that specifies if there is a limit to server 2 server calls between Audience Manager and Adobe Target.  Thank you!

HI,We have two different cross device profile merge rule created (scoped with different data source), one CRM (DPID 123) and one for products attributes (DPID 456). so when we build the segments, can we combine these two distinct onboarded trait together in segments and apply any profile merge rule. As i understand profile merge rule work based on datasource, so the rule that applied in segment, which is not connect with the one trait that I configured, will still be stretching the user? Example: CRM users(DPID 123) + black jeans product(DPID 456) both are onboarded trait.Is that possible or this is right way to do. Is there any option to build segments out of segments in AAM?ThanksKeerthi

Some of our pages have a new naming structure and I believe I will have to edit the names of old traits that will be effected by this. I thought there was a report you can pull that shows any trait that's showing up with zero trait population, i.e. something is broken. Am I missing it somewhere?

Hello everyone, Anyone has experience how to connect Data lake with AAM?thanks 

Hello everyone, Any suggestion how to integrate IM8 with AAM?Thanks

We want to update several existing Audience Manager data source integration code names but want to confirm if there are any detrimental impacts.  For example, an existing data source has an integration code name of “123”. We would like to update the integration code name to “abc”. 

Hello everyone, Any idea how to implement on how to implement Sentiment Analysis in Audience Manager?Thanks 

Hello everyone, Where can I find the structure for shared file in AAM? Thanks

New to Audience Manager and wrestling with how to produce the output below.  Peculiar request and need help.  (Apologies in advance for the simplicity of this question).  Feel like I'm clearly missing something. Required Output  " I want to see who (individuals, not segments) were exposed to which message (display creative). Confirmed the following (my checklist to validate this exists):* Display media pixeled - yes.* Have AAM identifiers - yes, AAM UUID, ECID, CID. I don't think the output (by individual) CAN be produced, rather by Segment.  Can you help?      * Confirmed I have UUID | ECID MID | CID 

Hello, Is it possible to onboard a file for People-Based Destinations without having a DPUUID sync? In this scenario we want to only onboard our customer email lists, and do not have an ID sync with a customer ID to a AAM UUID. The file contents example is below: hashed_email<tab>trait=1514df3958cb8489844677845e17690c2223cc7bac9ddef917d1c9f88e3ed949d<TAB>d_sid=xxxxxx   Thank you  

We are an agency using our own aam account.  Is it possible to connect our aam account to one of our clients' adobe analytics accounts so that we can use server side forwarding for ingestion of data?

Hi Folks,I'm trying to test the URL using Test Event URL. However, i'm getting below error:"Site visitor with this event would not exhibit this trait."Quick questions:In test event URL, Do i have to enter actual URL or demdex URL?In Event Type, which option should i select if we are looking for only visits on particular page? is it mandatory field? or we can leave blank as well? Thank you!

Hi all, My first post and I am a complete AAM newbie. We have a rule-based trait (and a segment that uses this single trait) that qualifies a customer if they fall into specific incentive programs. We discovered recently that data hasn't been pushing to Adobe for the rule-based trait to determine the qualification and so we have been seeing 0 traits realization. The trait has 15 days TTL. Assuming it worked before, let's say 6 months ago (March 2020), and broke down a month after (April 2020).  Is it correct to assume that:1) Those who qualified in March have dropped out of the trait2) For those who dropped out of the trait, they can no longer qualify back this trait since they are passed their TTL? Even if we fixed the data issue, the traits will only realize for those who were never realized back in March? And so the best bet is to recreate the trait and segment? Thanks,Alan

Hi, Has anyone collected data for mobile app just via DCS APIs?I need to know where does the MID value gets stored while making the API to get the d_mid value.What if we make another call from the mobile app, does it change the d_mid value or does it keep it constant.I know that for a browser, it will always keep that stored in the web browser's cookies, so all the subsequent calls will have same d_mid value. However, I need to know what happens in case of mobile apps? For instnace, what if we make following call to get the value of d_mid within mobile apps: https://dpm.demdex.net/id?d_visid_ver=5.0.1&d_rtbd=json&d_ver=2&d_fieldgroup=MC&d_orgid=E3DD2CA7548F0A2E0A4C98A7%40AdobeOrg  Thanks,Varun Kalra

Hi there, We're wondering about the benefits of switching to 1st-party aam_uuid cookie if we're already using the visitor ID service (with CNAMEs) and have server-side-forwarding enabled. Does anybody knows more? Thanks in advance and best,Jones

Looking to run a split test using other data overlays in a complementary solution. Is there a way to randomly split the traffic in Adobe (Target or AAM) and insert that designation in the URL under "Campaign=" or some other parameter? Thank you!

We've 3rd party data sources integrated with AAM. Is there a way to download the data in csv/excel to analyze it further?

The documentation for people based destination's states that a SHA256 email hash is required.  We're looking to adopt SHA512 as the hashing standard for all user emails and I'm curious if there is any issue with onboarding a SHA512 hash instead of a SHA256.  Thanks.