Adobe Analytics

Hello, i would like to have more than one breakdowns in another eVar. We want to create some pivot table for our customer and with this function we have more cross information. s.eVar1 > s.eVar2 > s.eVar3 etc. Regards

As a basic measure it would be very useful to be able to set the product key/name, as in s.products=";iPod";

Processing rules have been a huge help.  However there are some features that are not available in processing rules.Here are some ideas on what to add. - overwrite or delete an evar, prop or event set in the product syntax- set event to a dynamic value (a numeric prop for example)- have same funtionality as marketing channel processing rules (Adobe Detected section in Marketing Channel Processing Rules)- access to Adobe non-custom variables (product, channel, etc)

I created a report in Data Warehouse to be exported, and it took 3 days to complete.  Upon completion it was not delivered, because there was a problem with the FTP credentials supplied.  Apparently this report that took 3 days to complete is not sitting on your server anywhere for me to ask to resend it; I have to start over from the beginning, which sucks.  So I would like the following to be added: 1) When providing ftp info for a report, have a "verify" button that when I push it, Omniture will attempt to connect to it and send a small test file.  It should be able to know if it was a success based on the server-side result codes/values from the ftp call and give a little thumbs up or thumbs down or something.  Optionally allow me to instead confirm with a click that I received the file.  This will help prevent lost time and processing resources because of typos! 2) Add an option to resend the report if there was an error FTPing it! Why is there no option for this?  I am able to do

Having moved from 13.5 to 14, I've discovered that the color palette of V14 is incredibly difficult for color blind people to read. It's all greens and browns which is the worst possible choice for us. Approximately 8% of the population have some form of color deficiency (so 8% of the Omniture customer base are having issues.) There are a number of things you could do: 1) change your palette for graphics to be color blind friendly - there are many online resources that describe the simple steps you can take to do this.2) use other cues in addition to colors (dashes, line thicknesses etc) to indicate differences in data (useful regardless of color perception)3) Allow users to specify their own palettes For example - the two trend lines in most graphs for 4 weeks and 52 weeks prior, are virtually indistinguishable to me. Changing one of these lines to include some blue or brighter yellow would make things markedly better.

I love using workspace however alot of our reports are for a 12 week rolling period and within the vizualisations you are limited to up to 50 days. This automatically defaults to the start of the date period in question. it would be useful if it the date range could be increased to allow for longer spells of reporting.

Currently, there is no way to 'set it and forget it' for a Custom Date Range. The belief is that you can select Start of Current Month minus 1 Month and End at Current Day minus 1 Month. This results in subtracting the full month and not the 28/30/31 days. So, if I were to try to calculate Prior Month To Date, I would end up with the date range containing only the first of the previous month - not 1-12 or whatever. There is a workaround that I can subtract 28/30/31 days from the above calculated date range but I have to edit it every single month. This is not ideal. 

I would like to be able to export all of the reports (tabs) in the an Ad Hoc Analysis project (workspace) into Excel as a single Excel workbook.

Would be just fantastic if DW would let you go rerun an old report with a new date range. Or click "Edit" on a scheduled report and let you change the parameters and resubmit. Having to set up a new DW report from scratch each time is more than a little frustrating.

Often times, I have numerous metrics in an eVar or Traffic reoprt and I want to remove one or more of them.  It is annoying that you have to go to Add Metrics, Find it, Remove it and then save.  Why not just put an "x" or something similar in the column heading so you can just remove with one click?

Idea: Provide admins and/or users the ability to get a list of reports to which a given global calculated metric is associated.  This will help admins determine which reports would be impacted when a global calculated metric is edited or deleted. This will also help users understand how a particular calculated metric is being used and provide context to how users might benefit using the calculate metric in other reports/analyses.

Hi,If Analysis workspace can have the ability to import data from excel or other databases, so I can directly display in the dashboard. This will be a big win for the analysts. Right now, I have the site performance data in Analysis workspace showing the trends that business wants to know. What is missing is the 'projected growth' which usually lives in some excel maintained by another team. Also, the 'spend$' lives in another excel. If I can marry all the 3 components- acutal, projects, spend, etc. that would be huge. This will heavily decrease if not eliminate, the usage of yet another visualization tool like Tableau to do such reporting. The development process of taking data out of omniture, putting it into some sql database, making the connections in tableau and charting it, takes weeks. All this burden could be eliminated.

There are other examples of this in Reports & Analytics, but it would be really helpful if the labels in User/Group Management didn't cut off.  There's so much space, it doesn't seem like they should have.  If they need to, being able to see the full string with a tool tip would cover most situations. Also it would be great if the Pre-Defined Groups had better descriptions (or at least an easy place to understand more about them).

We would like to give some users access to view projects shared with them in analysis workspace, without giving them access to Reports & Analytics. For example, we would like to share an organic search related project with our SEO agency. We would only want them to have access to dimensions, metrics & segments that are used in this project. We would like to avoid the agency looking at these dimensions, metrics & segments outside of this context.

Currently, there is no option for a callback to occur after the SiteCatalyst image is placed on the page.  It would be great to have an optional function that we can configure, and if it exists, it will be executed after the image is successfully placed on the page.  I've got some code right now that can detect when the image is on the page, but it uses timeouts and is possible prone to some error. Not sure what the demand is for this, but it would be great to only execute certain actions after the request has been made, and not just by looking at a flag in the doPlugins function (since that gets executed on more than a SiteCatalyst request).

Hi there I was working with Adobe Analytics Workspace and wanted to create a pareto analysis for a customer. The business question was, which top-products generate more than 80% of total revenue.When I tried to build this Report, I used the advanced function "cumulative" for calculated metrics. But the result was not what I expected, because it summarizes the values of the revenue in a random order. Also there is no visualisation of the data that combines a line (for the cumulative % of total revenue) and a bar graph  (for the revenue of each product) and actually perhaps also a manually settable line (see red lines in the picture), so the user can set the line for example at 80% and knows which products generate more than 80% of the revenue or to set the line after the first x products and sees then how many of the revenue these products generate.   There are also a lot of other questions that could be answered with a pareto analysis: - which customers / browsers / regions generate 80

When I trend an eVar with Instances or a custom event as my metric, the graph is shown in terms of a Percentage.  However, if I switch to a calculated metric, the graph is shown in terms of a Count, rather than Percent. I've actually started just duplicating my events as calculated metrics so I can view them in a standard Count graph rather than Percentage.  See the screenshots to see the difference. It seems strange that Omniture would handle the graphs differently just because the metric is Standard vs Calculated.  This would be a nice addition as a Graph Option, as I'm sure there are some good uses for the Percentage graphs. Thanks! Percentage Graph Screenshot:  Count Graph screenshot: 

I love the "shortcut" link feature for reports, but really would like this added to Dashboards as well so I can create a Dashboard and then e-mail someone a link to it instead of having to tell them how to go to the "My Dashboards" area, add it to "On Menu" then refresh and then choose it from the top nav.  A shortcut link saves about 4 steps here!

With the introduction of the new segments the predefined segments unfortunately disappeared.Now it's possible to create approved segments and share them with everybody, but if the segment was not created for that specific report suite it is not directly visible. Only after unticking "(Only) {Report Suite Name}" all other Segments are visible, so it takes more clicks (and time) than before.If we want back the state from before (so select a segment like "Visits from Mobile Devices" or "First Time Visits" with just 2 clicks) we are forced to create those segments for each report suite. Obviously we are not going to do that for hundreds of Report Suites.I want an option to make certain segments available immediately when clicking "Show Segments" on every report suite.

it would be wonderful to be able to view or breakdown reports by minute.  right now, i do set an eVar/prop to time of day (hh:mm am/pm|day of week) but the tool does not give me the ability to sort by dimension.   it might also be nice to be able to configure eVars to be time dimensions.

Please this is annoying the Graphic Banner "Be Retoka".I would appreciate if you remove this.

Currently, only daily uniques are available for eVars in Report Builder. Unique Visitors should be available just like they are in the web interface. Thanks!

ReportBuilder is very powerful, but for us lacks two key elements from the SiteCatalyst UI.... 1. I can specify a number of ranked records to pull, but there is no way to get the report total that is provided on the bottom of every SC report page. 2. As stated in another idea for the SC interface, we need to also access the total number of line items, or unique entries, in any report from within ReportBuilder.

Hi, Currently, click map can only pick up the old school version of tagging when involving pick up the  tags (Such as you can see the full list on this blog (I will copy and paste this below) http://buglist.net/2009/07/omniture-clickmap-problems/ Can we please have this updated as we are having issues on reporting accurate data. Regards Andrew Recently, I decided to dig into some of the problems that exist with the Omniture Clickmap technology.First thing on my ToDo list was a brush up on the Clickmap documentation, updates could have been made since the last time I read it.Well, there was one big change, the Clickmap userguide has disappeared from the:“Help Home -> Supporting Docs -> Manuals” area, where all other manuals and implementation guides are located, it’s now only accessible through a Knowledge base article. Do a search for “Clickmap user guide” and it’ll show up in the results. (I’m still wondering why Omniture is hiding this file)After a lot of reading & testing,