Adobe Analytics

Hi all, I was watching a video on use of date ranges in Adobe Analytics. I am a little confused as to how the above date range is used for YOY comparison. Shouldn’t the date range be:Start: Start of current week minus 53 weeksEnd: Start of current week Any help is greatly appreciated, thank you!

Hi, Does anyone know where and if I can adjust the conversion attribution window?What is the default time frame and where can I see/change it? Conversion attribution window means the time frame in which the source will be attributed a conversion. Thanks,Gosia

What's the best way to report a bug? I've found a bug in which it is necessary to clean the browser cache in order to see graphics with lines. 

Has anyone successfully used Props and eVars from Adobe Analytics in Power BI? If so, how were you able to import them?

Hello the community,   I have a trouble regarding the marketing channel analysis. All lot of my trafic is in referral even if this is in 7th postion. The 1st one is paid search (and it's seems to be ok vs GA) but the second one is Natural search and I've just few visits vs GA. This this our configuration :       When I look at workspace I have this report : - marketing channel = referral / - channel detail = google.com - search engine = unspecified   First question : How can I correct it to put in SEO and not in referral ?   Second one : 90% of my orders are assigned to refferal (with a lt of bank site and despite the internal url parameters). what can I do ?   Best regards for your help  

Hi, I am trying to change multiple report builder requests to dates from cell but the option is greyed out for me. Any ideas?Thanks,Adam  

I am trying to calculate New Visitors for the whole website as well as a particular page, I was thinking of using the below logic:Visit_num = 1 (New Visitor)Visit_num > 1 (Repear Visitor)But this will give me new vs. repeat for the whole website; is there a way to calculate the same for a particular page on the website, I was thinking of using Visit_page_num; but not sure if that logic would work. Would appreciate any guidance around calculating New vs. Repeat directly from data warehouse in Adobe. @gigazelle @mihnead @andrew_wathen_ @urs_boller @michaelwon @jarnorossilux2 @sessoms25  

Hello ALL,We are using Adobe DTM for adding tags based on onload or onclick events. Now we want to determine how adding tags will effect page's performance? For a specific page, say on "contact us" page of a website, adding 3 tags will give same load time compared to adding 50 tags (adding tags on load event)?Please give me some idea on this.Thanks,Manoj

We are using KOTLIN framework for mobile app development. We are trying to integrate with mobile application using SDK downloaded from mobilemarketing.adobe.com and followed the steps in this link https://github.com/Adobe-Marketing-Cloud/acp-sdks. We are able to do the basic configuration for the gradle project as of now with KOTLIN. Please confirm the mobile android SDK fully supports the KOTLIN framework.

Hi,  I am trying to implement adobe analytics on a react native, what are the methods to the same. My app is wrapper app with the website in it and written in java script.  Please help me understand, how to do this ?.   

Our shopping cart has a number of popups that, after selected, cause the page to refresh and the scView or Checkout event to reload again. For this reason, in the 5 years we've had Adobe (I'm new so not my fault haha), they've never created a path for the 6 page shopping cart.  I tried to use this code to limit the shopping cart view page to once per visit or session with this: s.usePlugins = true;s.doPlugins = function() {s.events="scView,event52";s.events = s.getValOnce(s.events,"event52,scView")}; What am I doing wrong or is there a better way?

I have a number of exclusion rules I would like to place on a segment but also need to ignore these exclusion runs if event301 exists within a visits.   How would I do that Hey for more content what im try to get to a rule that says  Include visit which have been to page B / C / D Dont include visit which have been to Page A Dont include visit with a campaign code of ABC UNLESS within that visit they have had a event301 basically our exclusion of Page A is removing visits which have a purchase event and we need them to correct present conversion rates

Hi,I need help in order to be sure if its possible to accomplish this workaround in AA.I have a table with 3 columns:  ID, value1, value2. This table should be imported in AA somewhere.When a page of my site loads, I have the ID available on an eVar. Now, what I want is check this ID in the table I uploaded and then in case the ID is found I want to write value1 and value2 in two different eVars. Could you help me to solve this, please? is it possible?I know that using classifications I can upload my table and use this data in reporting or even build segments but what I need is to write these values in the eVars. Thanks in advance

Hello, I have multiple questions around marketing channel logic 1. Can anybody explain or point me to documentation for the dimension "Marketing channel", which can be used in workspace projects? Does this dimension expire at the end of a visit? Can a single visitor be bucketed into multiple "marketing channels" at once? I assume first touch channel is the first marketing channel used by the visitor and should never change. I assume last touch channel is the most recent channel used by the visitor and may change depending on which channel they arrived through most recently AND channel overriding logic. 2. Marketing channel expiration - what is the impact of this admin setting on marketing channel, first touch channel, and last touch channel? Thank you!-Evan

Hi All,We have recently developed an Omniture video tracking solution for HTML5 videos and we have followed the steps as mentioned in the link below.https://microsite.omniture.com/t2/help/en_US/sc/appmeasurement/video/index.html#Measuring_Video_for_Web_AnalystsWhat we are missing here is, how to extend this solution for the videos played in mobile phones.Since the video is played on different types of video players which are embedded on different types of mobile phones, is it possible to track these videos in milestones (Started, 25% played, 50% played, 75% played and completed)?In our mobile site, videos are embedded in to anchors as below;<a href="../video.mp4" />Therefore when the user clicks the video link, video will be played in specific player in the mobile phone.Appreciate your thoughts/views on this.Thanks,Isuri.

Hi All !  Glad to have learned about this forum at the Adobe Summit ! (Thanks SMacDonald2008!)I'd love to know if it is possible to change field names for data exports that include segments in Ad Hoc? For example when I copy or export a report, it lists the segment names as well as the date:     "Onsite Traffic + Video Views + Feb 2, 2014 (53 Days Ago)"Is it possible to have the field populate as a standard date?  (2/2/2014)If not in Ad Hoc, can I do this in Report Builder?Thanks!

Hello,Is there any way to create a segment in Ad Hoc Analysis that will allow me to see Pages per Visit, but only including specific pages?  For example. how many visits included any 3 pages from the list that I have specified?I am interested in comparing sub-sections of a site.Thank you.

Hello,I am working on integrating site catalyst with CQ, I am able to login successfully into sc.omniture.com and have user added to web services access api, but when trying to login through CQ I am getting exception when I checked the error log came across these exceptions. Can any one please help me out regarding this, thanks in advance.POST /libs/cq/analytics/sitecatalyst/service.json HTTP/1.1] com.day.cq.analytics.sitecatalyst.impl.servlets.SitecatalystServlet Call to SiteCatalyst method 'Connect' failed com.day.cq.analytics.sitecatalyst.SitecatalystException: not authenticatedCaused by: java.net.ConnectException: Connection refused    at java.net.PlainSocketImpl.socketConnect(Native Method)    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)    at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)    at java.net.Socket.co

Hi everyone,Unlike in the Reports & Analytics interface, the "All Others" page denotation is not clickable within the Flow (Pathing) reports in Ad Hoc Analysis.  Does anyone know a way around this?  Thanks!Jenn

Hi all,I have a bookmarked report with downloaded files to which I want to add a file. I've added this file to the advanced filter, but it disappears every time. It seems I cannot update the filter for that report anymore. The filter contains 43 items at the moment. When I clear all and add the new one it does work. I just cannot add any items or change the current ones.I've tried another bookmarked report and that was not a problem. Kind regards,Ingrid

I can see how I can send out reports, but can't seem to be able to send out a dashboard with reportlets in it.

I had the previous version of Adobe Reader and I put in comments for the publisher. Like reove, replace text etc. And now with the new version of Adobe reader they seem to be gone all of them except for maybe the sticky notes.

When I try to package my pages I keep getting the following messageAdobe Indesign CC2014 has stopped workingWhat do I do?  I have to print my paper in the morning.

Must get a large PDF below a specific megabyte threshold for submission to an application. Any ideas would be most appreciated!Thank you

I'm planning to use one the already existing symbols in AI in my company logo. I would like to know weather its legally OK so that I will not get in trouble later on.I would appreciate an answer on this. RegardsDavid