Adobe Analytics

I am reaching out to inquire about the possibility of exporting all of our historical Adobe Analytics raw data to either GCP BigQuery or GCP Storage Service. We have a significant amount of data stored in Adobe Analytics, and we are exploring options to migrate it to Google Cloud Platform for further analysis and storage. Our requirements are as follows:Export: We would like to export ALL historical Adobe Analytics raw data, including both dimensions and metrics, to either GCP BigQuery or GCP Storage Service.Data Format: We would prefer the data to be exported in a structured format such as CSV or JSON to facilitate its ingestion and analysis in GCP.Data Integrity: It is essential for us to ensure the integrity and accuracy of the exported data during the migration process.Transfer Frequency: We would appreciate guidance on how frequently the data can be exported from Adobe Analytics to GCP to maintain the most up-to-date dataset.Export Method: Please advise on the recommended met

Hello, we're considering transitioning a client to using Virtual Report Suites (VRS), but their historical reporting has been done through the DOMO visualization tool connected to Adobe and their existing Report Suites.  Can DOMO access Virtual Report Suites the same as Multi-Suite Report Suites? Will the VRSs show up on the list of accessible Report Suites in DOMO?  Thanks!

Hi Team, I have added Adobe frameworks in an iOS application and using binaries. i.e xcframeworksBelow are the frameworks:AEPCore.xcframeworkAEPUserProfile.xcframeworkAEPAnalytics.xcframeworkAEPMobileServices.xcframeworkAEPRulesEngine.xcframeworkAEPSignal.xcframeworkAEPLifecycle.xcframeworkAEPServices.xcframeworkAEPAssurance.xcframeworkAEPIdentity.xcframeworkIn Xcode General tab , I have kept it as "Do not embed" for all the frameworks.Screenshot for frameworks: When I kill the application and open the app again the application gets crashed with the following logs.Logs:dyld: Library not loaded: @rpath/AEPAssurance.framework/AEPAssurance  Referenced from: /private/var/containers/Bundle/Application/6EF49835-678A-4B35-913B-5D88E3433DA3/app_name.app/app_nameReason:dyld: launch, loading dependent libraries DYLD_LIBRARY_PATH=/usr/lib/system/introspection DYLD_INSERT_LIBRARIES=/Developer/usr/lib/libBacktraceRecording.dylib:/Developer/usr/lib/libMainThreadChecker.

Hi,I'm tracking the steps (screen App) of navigation for an App.I'm trying to see the navigation path by a flow report.Often I don't able to see the first step of navigation even if it is tracked (by a freeform table I see home's screen is tracked).If I check flow option "Include repeat instances" = Y, I see the first step of navigation in flow report, If I uncheck this option I'm not able to see the first step uncheck, it disappear from flow report.Someone is able to explain me this behavior? Thanks,Alex

Hi all,it seems to be that most of my campaign traffic is classified as Typed/Bookmarked. What can be the reason for that? I know some but maybe there are more.Let's have the following example:10,000 visits on my website50% of that is classified as Typed/Bookmarked8,000 visits coming via a campaign IDCan it happen that the CID is captured but the referrer not?Thanks in advance!Marina

Hello!I am currently working on a segment to help identify what errors happen during a transaction that actively prevent a customer from completion. At the start of the transaction event X fires and on completion, event Y fires.In the middle of this, some errors may occur that are a nuisance, but don't block the transaction. In essence, I want to rule out any customer who has successfully completed their transaction (when event Y fires).Right now, I have a segment that is built out as follows:All on the visit level. Event name = event Xthen Error Message exists then An excluded container that contains Event name = Event Y.  This segment is then used to show the error messages that happen throughout the journey within a freeform table. When I drop the event name dimension on the error name, however, I see Event Y coming up, which means that I am seeing people who completed their transaction.The desired result here is that I only want to see people who

Hello,We capture free-text search terms in eVar33 - aka customers go to our internal search bar and type in something like "hondas" and that takes them to a search page with results.  We are interested in learning which internal search terms lead to 0 search results.  We fire both a prop23 = 0 as well as event58 when 0 results are returned.  Based on the sequencing of page load and rendering results, this is the order in which they currently display:  Server call 1/hit 1 - capture internal search term in evar33Server call 2/hit 2 - fire prop23 = 0Server call 3/hit 3 - fire event58When we look at evar33 with event58, we get lots of internal search terms that DO return results...the problem is that because evars are sticky, a customer can then go apply other search criteria after that, like a certain store, or exotic paint color to that, which would then return 0 results.  So their free text term could lead to results and then if they apply other criteria (t

After we create this calculated metric, how should we use this to analyse the numbers by variant in Adobe Target report?

Hello everyone,I have a query regarding the use of the Web Vitals extension. Have any of you had experience with it? If so, could you kindly share insights on its implementation while minimizing the impact on our website's bounce rate?Your expertise would be greatly appreciated.Thank you,Sayyam   

Need to Track the Page Load time in a website using the new implementation method Web SDK extension as the Web SDK Plugin does not support this KPI to track.

helloI made a segment that looks for visits that go to the buy page ->(then) checkout page ->(then) evar(button click). For a table I put the segment I made with visit metric and put evar in rows. The total number was 35. There were different values of evar from different pages. Then when I looked at the evar value that I put for my segment, it was only 18. I know that total is the result of de-duplicated values and values from seg contain duplicates. What I don’t understand is that I understood 35 is the number of visits that exactly followed the sequence that I made for seg. So when I looked at evar as dimension, I thought the evar with the value I put in the seg also should be 35 or more if there are duplicates. So I tried to check the number by putting the visitor id for dimension with the metric in the same condition. Then I tried to break it down with the visit number, then with the evar. There were cases where the visit number contained the evar I set for the seg

Has anyone added Core Web Vital metrics (list below) into Adobe Analytics? - Cumulative Layout Shift (CLS)- First Input Delay (FID)- First Contentful Paint (FCP)- Largest Contentful Paint (LCP)- Time to First Byte (TTFB) I'm looking to scour through https://github.com/GoogleChrome/web-vitals but any suggestions welcome !

 Hello everyone, Added condtion in adobe analytics extension but still web.archive data flowing into adobe analytics. for your refference please check below screenshot. Please help me on this how can i block the web.archive data permanently.  Thanks!

Team, We are capturing the Tracking Code/Campaign pages with Query String Parameter(CID) via data element and setting up under the campaign variable through all pages rule. I believe if the page is loading with CID ( www.example.com/?CID=anyvalue ) then the value is going to be store under the eVar0 but if it is not loading with CID (www.example.com/) then without value data categorize under "Unspecified"? Seeing more data under UNSPECIFIED. Any other alternate solution to avoid "Unspecified" ? Regards,Shane

I have created a segment at the hit level using product codes, but when I run a product code report it returns thousands or results for product codes not in my segmentSo I tried creating a hit level segment of just one product code and even that returns hundreds of product codes It is not just junk data of 1 or 2 visit either, on the one with multiple product codes the Top 10 returned product codes include 4 product codes not in my segment

Hello team, I need to create a 'Next page exists' segment in AA so I can see the percentage of users that had a next page in their visit (not necessary a list of pages that they visited) when I report on a single page or a list of pages in the table format. In AA we have two ways to create a view of pages that users visit after a specific page ('Flow visualization' and Next of Previous item' panel). So to create a segment, I made a copy of the segment that Adobe creates when using 'Next item' panel for a specific page and then updated the logic in the segment to be high level without a specific page URL in it. Would this set up work/make sense? I compared some data points and overall the numbers weren't that far off if I used Adobe's Next item panel vs. applying my segment in the table. But wanted to get an opinion. Can you please take a look?  Thank you!

Hello, Is the Experience platform Launch Server Side is free option within adobe Launch? Thanks,Durga

Performing some offline A/B confidence testing using calculated measures.  Therefore, can't use Target lift and confidence.Found an Excel calculator that uses Sum of Revenue Squared as an input.  Is there a way to use calculated measures to create Sum of Revenue Squared?

I have discovered an instance where two metrics have inflated numbers. I have verified this using "Custom Link Instance" which shows the correct numbers for the traffic.  I want the inflated metrics to show the values we have for the "Custom Link Instance" metric.  How should I go on about creating this segment to filter out the inflated data and update the metrics to the correct values?  I have tried to use calculated metrics where the difference between [Custom Link Instances - Metric X] is greater than 0 but that filters out the data.  Any help would be appreciated.    

The error came from here. s is not defined   

I'm facing this error from a very basic query, and it doesn't include any details about what's wrong exactly. DataSource.Error: Unable to complete report at this time. Please try again laterDetails:DataSourceKind=AdobeAnalyticsDataSourcePath=AdobeAnalyticsErrorUri= Someone has ever seen this? I have checked everything and all seems fine, and it doesn't matter if I retry later, this error persists. This connector is such a headache 😞

I'm trying to track a Button click using CSS selector Event is getting fired but in that I cannot able to see eVars and events.1. I added the CSS script in events --> Core--> clicks. (CSS Script)button.productcollection__item-button.productcollection__item-button--add-to-wish-list2. Added the set variables custom code (Custom Code)document.addEventListener('click', function(event) {if (event.target.matches('button.productcollection__item-button.productcollection__item-button--add-to-wish-list')) {var buttonText = event.target.innerText;s.eVar49 = buttonText;s.linkTrackVars = 'eVar49,events';s.linkTrackEvents = 'event19';s.events = 'event19';s.tl(this, 'o', 'Button Click');}});

Hi all,Was curious what some of the reasons are for data feed status going to 'Approval Pending'?  I found the definition in the documentation so I know that it requires Adobe approval, but wondering what some of the possible triggers are and if there is a general turn around time for the feed to be activated? Thanks!

Hi - I am building out a Power BI dashboard by pulling in data from Adobe Analytics using the native connector that's provided. When retrieving the data by selecting the desired dimensions and measures, it's fetching only 10 records (be advised that it's not even top 10 when I cross checked). I did some Google research and understood that I need to change the M-code to 50000 which is the max capacity and changed the code to show top 50000. This seems to have resolved the issue on the surface. However, when I add granularity, let's say day level granularity it's again showing me only 10 records (Not top 10 records) when compared to Adobe Analytics. Basically, before changing the code, it was restricting to 10 records at an overall level. Now, it's able to show me greater than 10 records but when granularity is added it's again restricting to showing 10 records at each specified granularity. Any expert advice on this would be much appreciated on how to bypass this.For the same

In few of the Adobe reports, I am seeing Unspecified holds more traffic. When I checked the data layer variables, there is no value populated until user logs in. I mean on pre login pages, these data layer variables holds empty values. Does Adobe populate Unspecified if there is no/empty value in data layer variables? Or else any other reason for Unspecified.