Adobe Target

I have an adobe target test setup with one mbox and three experiences A,B and C, the split between the experience is 34%,33% and 33%. I have different values for each experience in the mbox. I am testing the adobe target api and I am using this endpoint POST rest/v2/batchmbox?, I am passing our clientid and a guid for sessionid.Issue is that I get the same Experience back each time never any of the other two even though the traffic split is even. Is there some caching on this api?

Wondering if its possible to show an activity based on asynchronous params, I know there is the targetPageParams but how would I trigger these params on a dynamic value that populated after Adobe Target is loaded such as an API call. Then how would I trigger the updated Param to the activity? Is this at all possible?ThanksJ

Hi,Wondering if its possible to show an activity based on asynchronous params, I know there is the targetPageParams but how would I trigger these params on a dynamic value that populated after Adobe Target is loaded such as an API call. Then how would I trigger the updated Param to the activity? Is this at all possible?ThanksJ 

I've seen that Client Side Target uses a visitor cookie to identify unique users (analytics visitor ID API I believe).  Does Server Side Target have a similar capability?  If sow how does it work and how could I incorporate it into my Server Side implementation?  TIA

Hi everyone,I have Adobe Target configured with Scene7. When I set up an Activity with an image stored in the Image Offers, the URL of the image becomes as follows and it returns the "Unable to find image file." message.http://smartimaging.scene7.com/is/image/null?tm=null&fit=constrain&hei=80&wid=812It seems, the integration with Scene7 may not be properly working as the image does not appear in Scene7 account and the URL format above does not look to be correct either.Does anyone know how to make the images from the Image Offers correctly embedded and displayed in Target activities?

I am new to Adobe Target and have been trying to follow the Above Target API documentation.  On the surface this looks very straightforward, but I have been unsuccessful when trying to perform any requests from the postman collection on any of our existing activities.  Although I get 200 response status, there is never any content.It is not clear to me what should go in host, url and in mbox name.  I have tried many combinations with what I think are the obvious answers to these, but obvious has resulted in an incorrect response.I have chosen an activity which has a at_property in order to understand authentication, but it is quite clear where we put the token value.  Another part of the problem is our activity uses the global mbox and the response for example from the https://*******.tt.omtrdc.net/rest/v1/delivery endpoint is {"status": 400,"message": "Errors: field - [execute.mboxes] - global mbox is not allowed in mboxes.;"} I have read that u

Hi, does anyone know if there is a way to export all Adobe Target activities to have it on one file?  I need to find a way to see all Live, Not active and Archived activities. Thanks! 

Hello, I am trying to create an email campaign that runs daily (once a day every week). The hero image should change daily and will be dynamic image coming from Target. Do I have to create 7 redirect offers in Target for each day or I could able to accomplish this by creating just one offer? Any ideas? Thanks! SK  

Hi Team, Client's few webpages are on SPA and few are on non SPA. On non SPA pages we already have target running through launch rule. Now on SPA Pages, client wants to implement target through launch so wanted to check if we can utilize same launch library ?We need to add triggers also through launch rule so modifying same launch rule would be fine? 

Hi, Is there a way to get the Activity Location (Activity Target URL) using the API?I am getting the details using https://mc.adobe.io/sap/target/activities/ab/<id> , but don't see that field. 

Is there a way, like a data-attribute, that can be added to an element in the DOM that disables Target Visual Experience Composer from being able to select that element? My use case is that I need to prevent certain areas of my web application from being altered by Target for business reasons.

Hi All,I am trying to implement a use case where we want to track the products browsed by a visitor and provide them with recommendations/personalised content with products belonging to the same category. Can we implement this using profile scripting / category affinity? Thanks,AB

Hi All,I am working on a use case where a user clicks on one of the three links on the page which is remembered in the cookies and we would then provide personalised content to the user based on the link he/she has clicked within the same session. We are using Launch and Adobe Target but don't have Audience Manager. Could you suggest how best we can achieve this? Regards,AB

Hi Team, Client has set up the analytics and target on their new mobile app and we are going live with the first AB Test.We need all target activity report data in Analytics so wants to cross check first if A4T is working for mobile app also.It works well with the website A4T activities (checked sdid and mid param).So my question is how do we make sure this in mobile app?We use charles proxy to validate the b/ss and tt call but ant find sdid param there. Any leads in this regard would be really helpful

Hi All,We have a situation where some of our products are very similar. You could consider them variations of the product.From a content perspective it is not the best look if we were to promote multiple of these similar products within the same recommendation result set, so we want to configure it so that certain items should never be in the same recommendation result.For example, if these are my products:ABCD-1D-2D-3I want to define a rule which says D-1, D-2 and D-3 never appear together.I can't figure out a way of doing it though. Does anyone have any ideas? I've seen this situation frequently with other optimisation and decision solutions but there's no obvious answer to me with Recommendations. Thanks,-Steve

Hi Team, Client Dev Team doesn't want to add pre-hiding snippet on page and is not much confident about this code. Target is implemented through launch async and we want to add this snippet before loading target action?So wanted to check if that works? We checked and it didnt work actually , we observed flicker. Regards,Ambika

I am trying to use experience fragments in a simple a/b test. The XF's have been successfully been imported into Target, but will not show up in the test variation.  When test using the Activity QA URL... I am getting an error and the XF isn't loading. I can see the page is trying to load the XF... <div class="at-script-wrapper"><script class="at-loader" id="atloader-a85d8898-2" type="text/javascript">atComponentInserted({"scriptId":"atloader-a85d8898-2","path":"/content/experience-fragments/large-format/language-masters/en/site/TEST/eDM50.nocloudconfigs.html"});</script></div> ...but the atComponentInserted function is not found... 1 Uncaught ReferenceError: atComponentInserted is not defined at <anonymous>:1:1 The error seems to be originating from Launch, but I can't find any documentation on the atComponentInserted function, so I'm not sure where to start to troubleshoot.  Any information on t

Apologies if this has been raised before - happy to be redirected to an answer. If the SFTP location has two fin files  with different names and corresponding csv files, which csv would be picked to update the records?When does CRS checks the SFTP for the csv file ? Is it once a day ? if it is once a day then at what time does it hits the SFTP serverIs there any notification errors appears on the UI when UI  fails to update the records ? Regards,Ambika

It seems that Adobe Target's cookies, e.g. "mbox" and "renderId", are being set with SameSite = "None", but the secure flag is not being set. As a result, this causes cookie security errors. How do I fix this?

Is it possible to edit the names of experiences in an MVT test similar to in an a/b test?  I am launching an MVT test with 27 variations using Analytics as the report suite via A4T, but I can't seem to edit the variation names to be descriptive.  Am I going to have to deal with trying to keep track of "Experience A, Experience B, Experience C" which would require me to manually build a lookup table for this?  Am I missing something?

I want users to be able to experience an activity on the follow conditions:- If this is not their first session on the site- If they have items in their cart To check if they have items in their cart, I've wrote a trackEvent code that will fire once the quantity element is present on the page. function paramQuantityLoop(){        var bagQuantityLooper = setInterval(function(){             if(document.querySelector('.total-quantity') && document.querySelector('.total-quantity').innerText != ""){                     adobe.target.trackEvent({                           "mbox": "customTestMbox",                           "params": {                           

Hey All, Can you help me understand whats the purpose of at_check cookie? I'm seeing following details on my browser: Cookie name: at_checkCookie value: trueDomain: .adobecqms.netExpires/Max-Age: Session

Hello,  We've implemented opt in service using Adobe Launch. Configured the ECID extension correctly like below  Now once the user accepts cookies for target, we've update the permission and invoke direct call rule to trigger as permission/ consent provided.  adobe.optIn.approve(adobe.OptInCategories.TARGET, true);adobe.optIn.complete();  Can see Adobe request coming through on page but can't see any delivery request in network tab instead getting below warning in console  and experience not coming through target  Any idea what's wrong here? 

We launched our test in Target. In workspace for that same time period for the same page we're getting 1900 unique visitors. However in the A4T workspace our variants are getting about 200 unique visitors each for that same time period, so we're clearly missing quite a bit of users out there. When creating the same experiment through Target from scratch we get the Page Delivery Settings modal, since our page is SPA do we need to add the additional URL to Template Rules? Would this also fix the substantial traffic that we're missing from our experiment or are these 2 unrelated issue?  Thanks for all the help!