Build better products with our product team
Description - It would be great if your company logo could be added to WorkfrontWhy is this feature important to you - It would help embed the technology into the business and help colleagues see that Workfront is an approved internal systemHow would you like the feature to work - Be able to add a company logo onto the workfront landing page and boardsCurrent Behaviour - No company branding currently available
Description - Would like to be able to mark messages as read on the @ mention widget and have them drop off the listWhy is this feature important to you - This would allow a clean view of items not read yet and remove items that have already been read or actioned.How would you like the feature to work - Add buttons overall to clear all messages or at the individual message level.Current Behavior: This does not exist.
Description -This is related sending emails from workfront Fusion. We need to use this feature to send emails via Oauth2 basedCurrently, It is using Username and Password to send emails.
Cloud Manager’s Content Sync capability is an important tool for keeping lower environments aligned with production. However, in its current form, the process can feel unnecessarily broad in scope and operationally inefficient. I believe there are several enhancements that could make the feature significantly more effective, flexible and performant.Intelligent indexing and comparison A valuable improvement would be the introduction of an indexing or comparison mechanism during content sync execution. At present, the process appears to operate as a full content copy. In scenarios where Production and Pre-Production both contain large volumes of content — for example, 10,000 files in each environment — it would be far more efficient to compare the target environment against the source before initiating the transfer. Such a mechanism could assess whether each file already exists in the target environment in an identical state. Where no difference is detected, the file could be excluded from the sync. In reality, this may reduce a 10,000-file sync to only the relatively small number of files that are genuinely out of date. This would reduce unnecessary data movement, improve efficiency, and likely shorten sync durations considerably. A practical way to introduce this would be as an optional setting within Content Sync, perhaps via a checkbox labelled “Enable Comparison”. If enabled, the sync would perform a comparison-driven transfer; if disabled, it would continue to run the existing full copy behaviour. Granular and targeted synchronisation Another highly valuable enhancement would be the ability to perform more targeted sync operations. For example, users could be given the option to select an individual file through a “Browse” function and sync only that file to a lower environment. Similarly, users could select a folder and sync all associated child pages or assets within that structure. In addition a ‘Claim dependencies’ button would be helpful where if it is ticked it also grabs any dependencies such as assets, references or content fragments that are required for the selected page or folder and children of that folder. This would provide much greater precision and control, allowing teams to refresh only the content they actually need rather than relying on broader synchronisation tasks. Combined Author and Publish execution Finally, while the separate Author and Publish options should remain available, it would be beneficial to introduce an additional “Both” option. This would allow users to initiate a single action that executes both Author and Publish syncs sequentially, removing the need to trigger each process independently and improving the overall user experience.Thank you for your time and consideration.
DescriptionCurrently, Adobe Analytics 1.4 API provides several powerful endpoints that allow administrators to manage report suite configurations programmatically. These include the ability to:Fetch and update eVars, props, events, and classifications.Retrieve configured processing rules for a given report suite.Adobe has announced that the 1.4 API will be deprecated in favor of the 2.0 API next year. However, these configuration-level features are not yet available in the 2.0 API. Once 1.4 is removed, these critical capabilities will be lost.For many enterprise-scale implementations, this functionality is not just convenient — it is essential. Proposed ideaExtend Adobe Analytics 2.0 API to include endpoints for:Variable Management: Create, update, and fetch eVars, props, events, and classifications at the report suite level.Processing Rules: Fetch and (if possible) update processing rules for a given report suite.Cross-Suite Comparison: Provide efficient ways to compare variable configurations between report suites via API.This would ensure continuity for projects currently relying on 1.4, while aligning with the modernized API framework. Benefits / Use CasesScalability: Easily update or configure variables across multiple report suites in bulk instead of relying solely on the UI.Transparency: Retrieve all processing rules in one call, making it much easier to audit mapping when there are 100+ rules.Consistency: Compare variable configurations across report suites to ensure alignment in enterprise environments.Efficiency: Save time and reduce manual effort by automating repetitive admin tasks.Call to ActionPlease consider adding these configuration endpoints to the 2.0 API roadmap to avoid losing critical functionality when 1.4 is deprecated. This would greatly benefit customers managing multiple report suites and complex implementations.
Hello Adobe Workfront team,Whenever a User is de-assigned from a Task; its Auto Assigned to the User’s Job Role. We don’t use the Workload / Resource planner functionality. Therefore this functionality of auto assignments to Job role, serves no benefit. Moreover its cumbersome, as a user has to remove a user from a Task & also remove the job owner role from the task even if the user was accidentally added.Can you therefore make this Auto assignment to Job-role functionality as optional (perhaps a system-wide setting that could toggle it on/off).ThanksHarish
🧾 Description We are currently migrating from Adobe Analytics API 1.4 to 2.0 and have identified critical gaps that prevent us from fully deprecating API 1.4. API 2.0 does not provide feature parity with 1.4 in terms of report suite configuration and variable metadata, which creates a blocker for automation, governance, and documentation use cases. 🚨 Key Gaps 1. Missing eVar Metadata The API 2.0 /dimensions endpoint does not return essential configuration fields such as: expiration_type expiration_custom_days merchandising_syntax allocation_type These fields were available in API 1.4 and are critical for: Automated documentation Data governance Attribution validation Migration verification 2. Missing Admin / Configuration Endpoints API 2.0 does not support: Creating or updating eVars, props, events Managing Marketing Channel rules Accessing or modifying Processing Rules Equivalent functionality existed in API 1.4 via ReportSuite.* endpoints. 🎯 Impact This is not a minor limitation — it is a migration blocker. We currently: Cannot fully migrate to API 2.0 Must continue using API 1.4 in parallel Lose visibility into critical configuration logic ✅ Requested Solution Option A (Preferred) Extend existing endpoints to include missing metadata fields. Option B Provide new endpoints for full report suite configuration management (parity with 1.4). 💬 Additional Context This is not a request for new functionality, but for feature parity with API 1.4, which is still required for enterprise use cases.
Description - Would love to have the option to pin and unpin a certain update to the top of the updates thread. This would allow for easy visibility on the most up to date items, etc. Would also love the option to filter updates by date, time, etc. to quickly search through and locate a certain update. Why is this feature important to you - This would increase productivity within the Workfront platform tremendously and would avoid confusion and clearer communication with cross-functional partners looking for information via updates. How would you like the feature to work - A button that says "Pin" next to "Reply" and " Like" - Once pinned there would be an option to "Unpin" For the filter, some sort of filtering option at the top right of updates then you can click and customize certain date, time, latest comments, etc) Current Behaviour - Updates are ordered in the time in they are posted, and all replies and updates are not able to be customized at this time making it difficult to find important updates.
Hi Everyone,Recently, Adobe shipped a feature (SITES-33594) that enables out-of-the-box OIDC support, removing the need for custom authentication handlers. While this works well for standard flows, we’ve encountered a limitation when integrated with Identity Providers like Okta.The Issue:When implementing RP-initiated logout, Okta (and similar providers) requires the id_token_hint=<id_token> request parameter to successfully terminate the session on the IDP side.Technical Gap:Currently, org.apache.sling.auth.oauth_client.impl.SlingUserInfoProcessor is only designed to store the access_token and refresh_token on the user node. Since the ID token is not persisted, we cannot retrieve it to complete the logout handshake OOTB.Requirement:We need a standardized process within the OIDC implementation to store and access ID tokens on the user node, similar to how access and refresh tokens are handled.Thanks,Martin
Currently it is not possible to clone Programs that contain emails using the new designer across Workspaces. A key part of how many organisations work with Marketo is through the use of Program templates or ready-to-go Programs that can be cloned and adapted, this is also one of the key benefits Marketo used to advertise with.The new email designer currently removes this possibility, blocking many organisations from using what could be a really nice upgrade. Without this feature, using the new email designer would increase roll-out times for new campaigns/Programs, which should never be the desired outcome.It’d be nice to hear from other organisations if this impacts you as well.
Currently, buyer group role creation in AJO B2B relies on exact-match or limited matching logic for job titles and attributes. This creates constraints when mapping real-world data, where job titles are often inconsistent, varied, or unstandardized.Introducing a “contains” logic would significantly improve flexibility and accuracy in buyer group definition. It would allow roles to dynamically capture a broader and more realistic set of relevant contacts (e.g., capturing variations like “Sr. Director of Radiology,” “Radiology Director,” or “Director, Imaging Services” under a single word - contains “radiology”).This enhancement would:Improve coverage and completeness of buying groups by reducing missed matches Reduce manual effort and dependency on exhaustive title mapping Increase scalability across regions and datasets with inconsistent naming conventions Enable more accurate downstream activation (e.g., LinkedIn, email targeting)Overall, adding “contains” logic will make buyer group creation more robust, efficient, and aligned with real-world data variability, ultimately driving better segmentation and campaign performance.
Description - The current proof zooming while reviewing a proof allows up to 400% zoom. While this may sound sufficient, it is not always in most cases. It would be great if the proofs could be zoomed in even more.Why is this feature important to you - On some files we review, there is small text that cannot be read at the current zoom level. In those cases we need to download the document and then add in comments seperately.How would you like the feature to work - If the zoom could be increased to 500% or more, it could solve the issue.
Description -Why is this feature important to you - This feature is required for security requirements for client organization.How would you like the feature to work - Support to MTLS in HTTPs mode for Workfront and Fusion integrationCurrent Behaviour - currently MTLS is only available in our HTTP mode and not HTTPS Thanks, Prasanna Nagarajan
Description -Why is this feature important to you - We want the ability to control whether the select all option appears in a mutifield dropdown or checklist. How would you like the feature to work - Add an option in the custom field that allows the admin to instruct WF to add the Select All option. If not selected, then do not allow the ability for the user to select every option. Current Behaviour - Workfront adds the Select All/ Deselect all option automatically.
Hi Team, Below are the details : Detailed Use CaseThere are multiple scenarios in which source data for batch campaigns or journeys is delayed. In such situations, we are required to manually start, stop, pause, or resume all related journeys and campaigns. This significantly increases operational overhead.Once the data issue is resolved, the same set of journeys and campaigns must be manually resumed, meaning the effort is duplicated for every data disruption. As a result, each data failure forces us to perform the same manual operational task twice, which is both inefficient and error-prone.Business JustificationProviding API-level capabilities to start, pause, stop, and resume journeys or campaigns would enable full automation of this process. This would lead to substantial reductions in manual effort and operational burden, while also minimizing the risk of human error.When handled manually, it is very easy to accidentally miss a journey or campaign, which can directly impact revenue as well as customer experience. Automation through APIs would ensure consistency, reliability, and faster response times during data-related incidents. Feature DetailsThe API should support the ability to start, stop, pause, and resume multiple journeys and campaigns simultaneously, rather than requiring individual actions per journey or campaign. This bulk-control capability is essential for effective operational management at scale. Thanks,Mithil
We would like to have the option to prevent an issue from being converted to a project more than once. Sometimes we have more than one person managing an issue and the second person does not see that the issue has already been converted. This causes the original project to be “lost” because it is no longer linked and opens up the potential for double work.
Description - On the Home Screen My Task Widget, there are only 11 possible column options. I would propose being able to customize this more or at least adding a few more.Why is this feature important to you - Our company heavily relies on this widget and a little additional information can prove very helpfulHow would you like the feature to work - The most useful additional column on the "My Tasks" widget would be "Task Details" since this is being used as notes on a specific task. An additional helpful column would be "Project Owner" and/or "Project Sponsor" (Understanding this might be more difficult as it is at a project level instead of task level).
Use case: We would like to target customers on below qualified dates and be suppressed if they don’t meet qualified date. So, looking for the solutions to manage dynamic qualified date in the journey if possible. 2 days before 1st Friday of each month e.g. Apr 1, 2026 1st Friday of each month e.g. Apr 3, 2026 1 month after 1st Friday (on 1st Friday only) e.g. May 1, 2026 2 months after 1st Friday (on 1st Friday only) e.g. Jun 5, 2026 3 months after 1st Friday (on 1st Friday only) e.g. Jul 3, 2026
The Concept: In sourcing, identifying cost pattern shifts or rogue spend requires heavy week-on-week spend analysis and deflation tracking. Adobe Analytics has built-in AI for this exact type of monitoring.The Adobe Connection:Intelligent Alerts & Anomaly Detection: Instead of using these features just for spikes in website traffic, they can be configured on internal B2B platforms to flag sudden spikes in unclassified spend or deviations from contracted pricing structures.The Conversation Starter: "Adobe's Anomaly Detection isn't just for spotting a sudden surge in website visitors. Imagine applying that same AI-driven alert system to internal B2B portals to instantly catch 'tail-spend' leakage or week-on-week deflation shifts without manual Excel tracking."
In the AEM Assets Omnisearch UI, when a user opens the filter rail and selects any filter (file type, date range, tags, etc.), a search is automatically triggered on every single filter interaction. This causes: Multiple overlapping HTTP search requests fired in rapid succession Server-side query timeouts under normal DAM load UI freezing while waiting for responses Users unable to combine multiple filters before seeing results Required behavior: User selects multiple filters freely without any search firing A custom "Execute Search" button is visible in the filter rail Search only fires when the user explicitly clicks "Execute Search" This is a production workflow issue affecting all DAM users performing filtered asset searches.
Packaging design plays a crucial role in shaping customer perception and influencing buying decisions. A well-designed package not only attracts attention but also communicates the brand’s identity effectively.Here are a few important benefits of strong packaging design:Enhances product visibility on shelves Builds brand recognition and trust Creates a memorable unboxing experience Helps differentiate from competitorsAt Design Concepts Creative, we focus on creating packaging that not only looks appealing but also drives real business results.You can explore some of our recent packaging design projects here:👉 our packaging design portfolio
In Adobe Orchestrated Campaign (OCM) Provide functional significance to the "Enable for Segmentation" toggle present on relational schemas. Why is this feature important to you UI elements that have no backend functionality create confusion for data architects and marketers during implementation, leading to unpredictable behaviors and wasted configuration effort. How would you like the feature to work If the toggle is present, it should actively allow the fields within that relational schema to be leveraged in the standard AEP segment builder. If this is not technically viable, the toggle should be removed from the UI to prevent confusion. Current Behaviour The “Enable for Segmentation” toggle on relational schemas has no current significance
Enable Adobe Journey Optimizer (AJO) Journeys to natively query and consume data residing in relational tables. Why is this feature important to you Siloing relational data strictly to Orchestrated Campaigns creates a disjointed architecture. Real-time journeys often need contextual data (like store inventory or loyalty tier lookups) that is best suited for relational storage. How would you like the feature to work Allow AJO journey conditions and personalization syntax to securely reference and pull data from relational schemas linked to the primary profile. Current Behaviour Relational tables are designed for OC only and cannot be directly consumed by AJO Journeys
In Adobe Orchestrated Campaign (OCM) Introduce a native, automated feature to clone XDM profiles into relational stores without dual-ingestion or Query Service workarounds. Why is this feature important to you Architectural simplicity reduces technical debt and maintenance costs. Forcing data engineers to ingest data twice or build scheduled Query Service scripts just to populate relational tables is an inefficient use of platform resources. How would you like the feature to work Provide a UI-driven toggle or standard data prep mapping function that allows specific XDM profile attributes to automatically sync or "clone" into designated relational schemas upon ingestion. Current Behaviour There is no free auto clone feature for xdm profiles into relational stores; data must be ingested twice or derived via Query Service
In Adobe Orchestrated Campaign (OCM) Enhance the test profile creation wizard to include functional hooks for updating or populating relational tables via CSV upload. Why is this feature important to you Robust QA requires highly specific, multi-dimensional test data. The inability to inject test data directly into relational tables hinders our ability to thoroughly validate complex orchestration workflows that rely on those data structures. How would you like the feature to work The test profile wizard should support a CSV template upload that maps test identifiers not only to XDM profile attributes but directly to custom fields within linked relational schemas. Current Behaviour The test profile creation wizard lacks placeholders or functional hooks to update or populate corresponding test data within relational tables via CSV upload
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
