Adobe Workfront

Hopefully a simple one for the FUSION experts out there. I'm attaching tasks to a project from a task template  Having found the task ID of the task I want them to be added BENEATH (234:ID above), when I put that ID in the PredecessorTaskID field - it just puts all the templated tasks at the bottom. Am I using the right field for this - or is there another way ?

Hello community, I'm getting more and more frustrated with Adobe Workfront's support.While it has not been easy to get meaningful and, above all, timely support in recent months, requests do not seem to be addressed at all over longer periods of time. Is this just a subjective assessment, or is it the same for you? RegardsLars

Applications are now open for the Adobe Workfront Champion Program, inaugural class of 2025/2026! We’re looking for highly skilled and passionate Workfront customer/partner practitioners. The application window will close on June 10th. Don’t miss this chance to elevate your impact, build your brand, and become part of an elite group of Adobe advocates. Apply today: https://event.adobe.com/2025championapp-Workfront?trackingid=X6FJHGWG ICYMI: The recording from our May 15th informational webinar is on this blog page: https://experienceleague.adobe.com/en/docs/events/learn-from-your-peers-recordings/adobe-champion-application. Lots of information on the program, what it’s like to be an Adobe Champion, and tips for submitting your application. Good luck!

Hi all,Has anyone experienced an issue where a required multiselect dropdown field in a custom form fails to save selected values when it's shown conditionally (e.g., only appears when another field = “Yes”)?In my case:Field A = Yes → reveals Field B (multiselect dropdown)I select values in Field BAfter submitting the request, Field B appears blank, as if nothing was selected even though it's marked requiredOther required fields are saving correctly, and the logic to show Field B works it just doesn't retain the selected values after submission.Any insights or recommendations on how to address this issue would be greatly appreciated. Thank you!

I am using the below to pull some data into a Task report from data on the Project custom form. This was previously in a calculated field but as I need this data to be readily refreshed, without being prompted, I have moved it to the column. What I am now unable to do is sort or group on this data. I tried adding a line for sorting but it hasn't worked. Does anyone know what could get this working?displayname=Bet Content Task - Start Time & Date valueexpression=IF(CONTAINS("1",{name}),{project}.{DE:UKI - Bet Offer 1 Banner Live Start Date & Time},IF(CONTAINS("2",{name}),{project}.{DE:UKI - Bet Offer 2 Banner Live Start Date & Time},IF(CONTAINS("3",{name}),{project}.{DE:UKI - Bet offer 3 Banner Live Start Date and Time}, IF(CONTAINS("4",{name}),{project}.{DE:UKI - Bet Offer 4 Banner Live Start Date & Time}, IF(CONTAINS("5",{name}),{project}.{DE:UKI - Bet Offer 5 Banner Live Date & Time}, IF(CONTAINS("6",{name}),{project}.{DE:UKI - Bet Offer 6 Banner Live Start Date

Hi Workfront Fam. I am looking to create a Fusion scenario that utilizes the number of decisions a user makes per month. We are able to view this information on reports in Workfront. Additionally, there is an API module called User Decisions in the unsupported API version (this would be perfect by the way). Do you know of a workaround to find the number of proof decisions a user makes in a month using Fusions? Do we have an idea when the User Decisions will be supported via API?  The goal of the scenario: utilizing user decisions to systemically track and adjust license level from light to contributor. 

After successfully using proof URL's in a report for well over a year, they suddenly stopped working yesterday for my users.They now come up with a message:You do not have permission to view this proof. Ask the proof owner to add you to the workflow.This is not practical in our 100's per day scenario, and has as I say been working fine.We've made no changes to Workfront or users and these are the same users that have been active over the past year enjoying this facility.Has something changed in Workfront ?

I am trying to create a calculated field for a series of Tasks. If the Task name Contains the number "1" I need it to display a date from the Project custom form.I was able to return a True/False result using CONTAINS and I have been able to display the date without a condition but when combining the IF and CONTAINS functions I am getting no result.Here is my expression - can anyone help?IF(CONTAINS({name},"1"),{DE:UKI - Bet Offer 1 Banner Live Start Date & Time},"")

We are thinking of JumpSeat.io to integrate with Workfront to help the new users with Guides and wayfinders.  anyone aware of it? and how efficient is it with Workfront? any drawbacks or better tools to similar to JumpSeat?

What happens to the logs after 90 days in audit logs? Are they completely deleted or archived? Also, is it possible to somehow pull them back if unavailable?

Hi All,I'm attempting to export a task form but I want to prevent certain fields from appearing in the export to pdf.  How could I go about concealing certain fields from displaying in an export file?

I'm having trouble getting a user wildcard to work in a valueexpression within a nested list statement. My end goal is to show a column with all those co-assigned to a user's tasks, but not show their own name.  Using the collection of Assignments within a task, I can make this code work and it correctly lists only the other people that are co-assigned with the user with that specific ID: displayname=Co-Assignmentslistdelimiter=<p>listmethod=nested(assignments).liststype=iteratevalueexpression=IF({assignedTo}.{ID}="5d13826400d6f67f13d0f5847989da56", "", CONCAT({assignedTo}.{name}))valueformat=HTML But when I switch out the hard coded ID number for the variable $$USER.ID the column is blank. displayname=Co-Assignmentslistdelimiter=<p>listmethod=nested(assignments).liststype=iteratevalueexpression=IF({assignedTo}.{ID}=$$USER.ID, "", CONCAT({assignedTo}.{name}))valueformat=HTML I've also tried "$$USER.ID" and {$$USER.ID} to no avail. Does anyone know i

I have a few scenarios where I use watch events to listen for new documents.  However now I want to create one to listen for a document added to a specific folder in projects.Is there any specific way to do this in the watch event directly or would I have to listen for all added documents and then somehow test for whether it lives in that folder?I don't see anyway to identify the folder a document lives in. Thanks in advance for your helpFrank 

Hello,I am looking for ways to assign a team/group to a proof for approval. Similar to how tasks can be assigned to a team, we wanted to see if it would be feasible to assign a team to a proof and have a team member approve/review the proof. We have created automated proof templates that kinda help, but it is still individual users who keep changing. The groups created in PoofHQ are more for sharing, so I wanted to ask here to see if anyone has any solution for this.

In Project Preferences Status, I used Hide Status in the Queue status set up, thinking that would hide Queue status as an option from non-admin users adding a queue status to their projects. We have request projects set up with queue status and that's the only project type that should have a queue status. I hid queue status in the main system status, but I can still see queue status as an option to add when I log in as a non-admin user project manager. Am I misunderstanding the purpose of hide status or does hide status only work if the status hasn't been used ? Thanks   

I have a route in my scenario where the objective is to truncate all strings in a column that are 2000 characters or greater, and I'm hoping someone can suggest a more elegant solution. Right now, I use a Search module as the first module in the route and it is searching just for ANY entry in the datastore that has a unique key (i.e. EVERY row in the data store).   Then I tried to use an iterator module to go through - what I'd thought was -  every search result, and only if the string is 2000+ chars - depending on the row type  - a type-specific variable would be set to create a truncated string to ultimately overwrite the value in the original string field of the datastore.  However this approach has produced very problematic results. I learned that the iterator module processed each search result in an array separately, creating individual bundles. And the bundles kept on proliferating so that even if there were 161 rows in the datastore,

Is it possible to have a request queue and within the custom form there is a question (let's say 'yes' or 'no'), if Yes is selected a second custom form is attached to the request. I am not looking for display logic to appear within the original custom form, I need it to be a separate custom form which can be completed at the time of the original request. For example, I am submitting a request using Form1. In Form1 there is a question to which I reply Yes. Because I selected Yes, Form2 appears under Form1 for me to complete. Could this be achieved creating a Fusion scenario? Thanks

Hi All,We have a Prime plan.  I wanted to check something under our system settings, and I noticed there's a Data Connect option:I don't recall seeing it before (if it was there, I missed it).  Does its presence mean we have Data Connect as an add-on, or is that menu item included for everyone?I can ask our rep, but I have zero control over spending and don't want to get anyone's hopes up if we don't already have it.😄 

I am prepping for our renewal which will move us to the new licensing model.   For the Prime package, I understand that an External User can have up to 5 proof decisions per month. We currently have a good amount of external vendors receiving proofs that far exceeds the 5 decisions allowed per month. If I downgrade them from a "reviewer and approver" to just "reviewer", which removes the ability to make a decision, will that allow me to avoid upgrading them to a paid seat?   Thank you in advance!

I have a user report that filters by the "Work" license type. Our Workfront license renewed on Monday and changed to the Prime license model, and that report is no longer working properly.licenseType=T licenseType_Mod=inI looked at the API, but do not see the updated licenses. Does anyone know where I can find the values for the new licenses - Standard, Light, Contributor? The users that should be showing on the report currently have a Standard license, with "Worker" access level.Thanks!