Adobe Target

I am trying to get Analytics segment data in Target A/B activity , Unfortunately getting error when click on View in Analytics link. Created segment in analytics and used that as audience in target activity and trying to see real time data. Could some one please help here how to resolve this error. error attached 

I want to know if there are any options available in Adobe Analytics and Adobe Ad Cloud where you can apply rule-based automation to activate and pause campaigns. For example, if Campaign A reaches 50 conversions, then pause the campaign. I'm looking for a solution to apply campaign activation and pausing on a recurring basis. I receive a list of 20 campaigns with their conversion targets every week. It's such a manual task, and I'm seeking to reduce the labor-intensive work by implementing rules based on the activation of campaigns mentioned in the rule or any source sheet and pausing them when they reach the conversion target.

I am implementing Adobe Target through the platform Web SDK and have configured all the steps as mentioned in this article : https://experienceleague.adobe.com/en/docs/platform-learn/implement-web-sdk/applications-setup/setup...After i created an activity in adobe target i can see that the changes from activities are getting applied on the page. However, pageviews are not getting recorded.   I Checked in the debug mode and send event is getting triggered. Any suggestions to resolve this issue will be really appreciated

Hi Community,Below is my scenario, I found something but i need the best practice and solution.Scenario: Need to append the image in Dynamic way based on the visitor mobile operating system (Android, iOS)Note: This changes only for Mobile users only.Activity Type: A/B TestingVariant A: ControlVariant B: Two different background Images same location (need to change dynamically), Image 1: Android user, Image 2: iOS usersVariant C: Another Two different background images with some content on the same location (need to change dynamically) mage 1: Android user, Image 2: iOS usersThanksKaruppiah

Has anyone else been experiencing issues with the Target UI? For the past week or so, I keep get the prompt asking me if I want to leave the page, when I haven't clicked to close anything--whether I've made a change or not. Now, I'm getting the following, which has been spinning for several minutes.I've tried logging out, clearing cache and deleting cookies, however this has persisted. Anyone know what's going on?@Amelia_Waliany @jagpreet_singh_ 

Hi, I need to know what are the sources?? Whay are they used?? Can we import segments from anywhere?? Is there any indication that we can use this?? I cannot find anything related to this?Like how we can get data from other sources in adobe analytics? Can we do the same with the adobe target? Can we get the other segments in adobe target as well?? I need clarity??

Disclaimer: I am not a dev so not 100% the terms I am using are correct. Say we have a Angular JS element on our page that shows a panel (js angular object) as collapsed upon page load but we want to test it as expanded upon page load. Is this possible to do using Target? Thank you!

Hello mates, I'm attempting to configure an experience with Adobe Target using the VEC in a Single Page Application (SPA). Initially, it works fine on the first visit, but when I navigate through the web and return to the page where the experience should trigger again, it doesn't work. I've checked the DOM, and the script is present, but it doesn't execute, even when forcing adobe.target.triggerView() in the console. . Can anyone help me with this?I truly appreciate it.Many thanks in advance.

I get this message when trying to set up an XT and report back to Adobe Analytics.Is this possible?Is there a configuration that is blocking that I need to change?I want to track engagement, etc with the XT and report back on it in Adobe Analytics.   

Hi Team,I  want to implemented the use case basis on encrypted customer id1)Customer is new visitors2)encrypted customer id is empty or null then show the banner, if encrypted cust id is present then don't show the banners.

Hi all ,          In Target while in XT or Any activity . I used to get offer decision option. But, recently I am not seeing the option . We have access for AJO and we meet the pre-requisites , I wanted to check my offer. But, still the option is not showing. Can, anyone tell me is that we are missing any configuration or is this a issue. Please let me know if anyone has idea. I have attached the image for reference. 

Hi all,  we are facing an issue regarding Target implementation. Assuming we are using Mobile Platform SDK only to implement Target solution we were choosing the best approach to send Target data to have information on user (profile info and entity details).  Would it be correct to use sendEvent Action to send adobe edge data payload or it is not necessary and we may only use updateProposition Api?  Thanks in advance. My concern is that we only use target, not analytics or other solutions.  

Hi all,  We have a test that has been running for 2 weeks and it's at 92% confidence - I can see from the trend graph in A4T there are two points over the 2 week period where the highest points are above the current Confidence level which indicates to me that it has already peaked to 95% but we missed it.  I can't find a way in analytics to break down the confidence rate by day to see the actual percentages and it won't let me create a visualisation from the confidence dimension to achieve the same.  There is no notification when a test reaches confidence and from what I can see it can decrease - should I leave the test to run longer or stop it claiming that at some point over the 2 week period it reached confidence even though we are at only 92% when it ended?  Any help is appreciated Many thanks  

Both of these cookies contain references to the Visitor ID.  Would it be an issue if they had different values for MCMID?   

Hi,  I have an A/B test with 1 default and 1 challenger experiences. The challenger experience then has multiple experience audiences applied to allow for regional variations. The multiple experience audiences are activity only audiences combining AAM and Target elements. In both Target and A4T reporting I can view results by default and challenger experiences but I can't see how to break that down further by the multiple experience audiences. ThanksTim

Hi,  Is there any documentation for that? I am trying to implement Target Recommendations using WEB sdk and there is no much info about that. 

Dear All, We are using AEM Cloud as CMS and Adobe Target for personalization. We have a scenario to create an A/B test activity and change Hero banner image using Adobe Target. However, when I try to do so, I am not able to see that option like Replace Image or update "src" link of new image. Probably because it is a background image, "img" tag is not being used in HTML , instead <div> is used. Has anyone faced this issue before? What are possible options to do so? Many thanks in advance Best,Rupal

We are trying to test the On-Device-Decisioning (ODD) Feature for our XT Activities and have noticed that some Activities are not qualified for ODD ... for reasons.According to the documentation, it is not clear why some of the Activities are not qualified. We tried to check what the reason for the exclusion could be and it seems to be, that Activities with an Remote-Offer as a result are not qualified for ODD. The Remote Offers are just relative URLs to our central CMS and we see no technical reason why this should not be possible. Is this use-case just not implemented or are there any other reasons? Thanks in advance for an answer!

I am adding personalization to an Angular SPA application. I am using A4T, and need your advice regarding how to connect mbox display events with analytics "page load" requests.I am using the form-based composer as the application has a logged-in-only experience, and there is no way to pass through the login process in the VEC (top-frame redirects). I defined several mbox-es, and use them as locations in activities. When the application loads, it issues a prefetch request to Target to retrieve all applicable offers.When the user navigates to a specific route component ("page"), the app renders the applicable offers as recommended on this page https://experienceleague.adobe.com/en/docs/target-dev/developer/client-side/at-js-implementation/functions-overview/adobe-target-getoffers-atjs-2: mboxes.forEach(el => { let selectorExpr = ".mbox-name-" + el.name; if (el.options) { if (document.querySelector(selectorExpr)) { adobe.target.applyOffers({

We have created AB Test in target. For All visits Experience A and for Mobile visits Experience B. We have created Mobile visits audience in Adobe analytics and in this case it is not working as expected in first visits only return visits are working.We have checked this issue by creating audience in target and it is working.Can anyone help on this issue why adobe analytics audiences are not working in target as expected.

Hi Community,Tiebreakers priority is not working properly. Below is my approach.Scenario:Activities URL: Same URL, Activity Details: Same Location (Banner CTA Name Change).Activity 1: CTA Name Change (Know More), Priority:999, Audience Targeting: All Visitors, Activity Status: Live, Approved Time: 12:30PMActivity 2: CTA Name Change (Learn More), Priority:999, Audience Targeting: Chennai Visitors, Activity Status: Live, Approved Time: 12:45PMNote: User qualified for both AudienceCause: Both activities are executed and according to the document(https://experienceleague.adobe.com/en/docs/target/using/activities/priority#:~:text=Adobe%20Target%20determines%20which%20activity,Composer)%20you're%20using.), Activity 2 (Learn More) should be displayed on the screen for the targeted audience specified? In my scenario, Activity 1(Know More) is currently being displayed based on which was approved first.Any suggestions? ThanksKaruppiah 

How can we possibly implement Pop up to appear on page via JS and CSS?