Adobe Analytics

Description - I think it would be handy if a calculated metric indicated an annotation when one of the metrics inside the calculated metric has an annotation. Having to add calculated metrics to the annotation list can be cumbersome, and users across our enterprise may have made their own calculated metric and are unaware of the annotation on one of the building-block metrics.  Why is this feature important to you - I think this would provide context to any abnormalities seen using calculated metrics, especially to those who aren't in the data everyday.  How would you like the feature to work - I would like annotations to show up for Calculated Metrics based on the building-blocks of said calculated metric. For example,  I have a calculated metric of "Room Nights per Order" (room nights / orders) that showed a historical dip with no annotation available. I added in the metrics Room Nights and Orders on their own to the table, and once added the annotations

Description - Integrate Core Web Vitals data directly into Adobe Analytics. Why is this feature important to you - Currently have to use outside plugins or tools to find the Core Web Vitals data then cross-reference with Adobe Analytics data. How would you like the feature to work - Run Core Web Vitals reports directly within Adobe Analytics. Current Behaviour - Not applicable. 

Description - A panel that can be updated from one source and used within multiple projects.  Why is this feature important to you -Consistency mainly but also for democratisation. Teams will want bespoke projects for their needs but across teams they will have similar questions. For example merchandisers, trading and marketing will want bespoke projects but within each of these projects they want to understand top search terms. The top terms panel is built the same across each project, any breakdowns can be achieved with dropdowns.  How would you like the feature to work -Somewhere to build and pull in template panels to quickly build projects. When I update a dynamic panel it updates for all the projects it applies to. There could also be the ability to unlock a panel after pulling it in, using it as a starting block.   Current Behaviour -Each panel within each project is unique 

Description -Measuring the time between events is an area that is often asked about by our users of Adobe Analytics and is an important measure of improvement for many processes. At the moment if we want to find the time between events we can set custom code up for each specific scenario and pass this into an event, build some calculated metrics etc. but this is a very clunky and inflexible way to operate. I can't help thinking this is an area that Adobe could do something really special in.  I'm imagining a new visualisation that you could drop 2 events into and it would spit out a whole host of metrics and visualisations (average time, histogram of time take with minute buckets, average time trended over time, percentiles etc.). Why is this feature important to you -Time between events is important metric for our Adobe Analytics users and there is no out of the box support for it (solutions seem to require custom coding which is comparably inflexible). How wo

Description - Why is this feature important to you -  Knowing the density of a mobile device (DPI, Dots per Inch) is helpful for mobile developers to understand the requirements of the app users. How would you like the feature to work -  An additional mobile dimension named something like "Mobile Screen Density" would capture the dpi of the device a visitor uses.  Current Behaviour -  This is not an ootb dimension

Description - Report Builder reports have a few issues, one which many of us are unsure of how this will work come Dec 2023, and one that has always been a pain in our sides....   First, Report Builder schedules are managed in "Scheduled Reports" (along with all the legacy reports that are soon to go away). When Reports is sunset at the end of the year, where will we we able to manage our Report Builder reports? Will this section remain solely for Report Builder? Will it be migrated to the Scheduled Projects area where we can start leveraging tags? If so, we will need a new column to indicate which is a Workspace and which is Report Builder.   The second issue, is in regards to asset management. Report Builder reports aren't currently listed in the user assets... when a user leaves the company, part of that cleanup involved transferring assets from that user to another... Report Builder assets are not listed here and are non-transferable.   While I realize that we need t

Hi Everyone,since the launch of Apples iPad OS in September 2019 we see a huge shift in visits from "Tablets" to "Desktop Devices". Reason for this is the User Agent that´s submitted by Safari, declaring iPads as Macs. A deep look into our data showed that more that 60% of Tablet visits on our Website were reported as Desktop Device (Mac). This caused many problems on our end. All device specific KPIs, including our sales Conversionrates, are not correct. For example: Adobe Analytics shows a Tablet Visit share of 3%. It should be around 10%. Sadly this is still the case in our Adobe Analytics Reports. So it seems that Adobe ist still not able to fix this from their end. Since more that a year now. We did a workaround on our own and had to recreate all used segments that are referencing to device types. Here the workaround we used for our data: https://stackoverflow.com/questions/58019463/how-to-detect-device-name-in-safari-on-ios-13-while-it-...In cas

Description - On default wrap labels to be selected in flow visualization Why is this feature important to you - In the Flow visualization, If the wrap label selected on default, then i don't need to select manually every time i create a flow visualization to see the full name of the page. How would you like the feature to work - By default, wrap label check box should be selected. Current Behaviour - Now, it's not selected by default. User has to select it manually.

Description - Please create a feature, that allows to schedule Workspace projects with closed panels. All panels within a project should be separately selectable for schedule. Why is this feature important to you - Because a lot of projects contain many panels. To keep the project accessable (not loading data all day long), panels need to be closed. But to send a project on schedule, all panels need to be constantly open. This can really slow down a workspace project and makes it hard to read or do changes. How would you like the feature to work - When a project with e.g. 10 closed panels needs to be send on schedule to stakeholders, it should be possible to have an option like a checkbox for every panel to choose them separately for schedule. Result: The project is send as PDF report with 3 of 10 panels open. But the Workspace project itself will remain as with closed 10 panels for the user. Current Behaviour - Either panels are closed, then you can't send them as scheduled PDF

Hey there, I am a windows user and I would like to utter some things that I mind in respectively features that I would welcome in a future version of various Adobe CC programs: I am looking forward to get a response from you in case you like my ideas for ameliorations / advancement.   Concerning Photoshop: 1.) The gradient-tool is great but why don´t you just display it as a line, with 2 dots at the end, that stays on the screen so you can adjust the gradient more comfortable. In my opinion it is laborious to re-draw the gradient over and over again just to make a tiny change because the line disappears every time.   2.) My workflow could be accelerated if I would dispose over the opportunity to press the mouse wheel and drag in order to move / execute the same function as the hand-tool (letter H) respectively space bar + left mouse key.    3.) Press "U" and draw a shape. If you want to give the shape a border it will be set to a weird spiky style border by default.

Description - Why is this feature important to you - To analyze the top internal search terms and match the performance with engagement and order and conversion. for example- my website's internal search volume are high for many items but the conversion is very low for the high volume search terms. I can see now the top search terms and al add he metrices as i want. But, i want to sort each column separately to set the value like- search terms with a value btw  1000- 5000 and coversion value btw- 0-1 and the table should show only those search terms How would you like the feature to work - Current Behaviour - I can see now the top search terms and al add he metrices as i want. But, i want to sort each column separately to set the value like- search terms with a value btw   How would you like the feature to work

It would be nice to be able to do the following: - delete clickstream data feed templates - upload clickstream data feed templates - multi select clickstream data feed templates (to add or remove) - see columns by category of some sort.  - give a template a name and not some cryptic guid (or timestamp)   the wole experience is lacking here. 

Can we add a setting to the Fallout Viz to hide/show the actual volumes that appear under each step (the visits/visitors)? Hiding these would mean that the viz only shows the fallout/fallthrough percentages (on the chart and in the pop-ups). The volumes NEVER match figures elsewhere in a dashboard. Whilst I appreciate the steps are sequential, if I have a Freeform table with "Page A" as the dimension and Visits as the metric, and then I create a Fallout where the first step is "Page A" and its set to use Visits, the numbers don't match, even for this initial step when there's nothing else in the fallout viz. As a result, this is the #1 subject for queries I get... why don't the numbers match those shown in a freeform table elsewhere in the dashboard - and it makes users query the accuracy of Adobe Analytics entirely. Whilst I've tried everything to get them to match they never do. And as the main feature of the fallout is to look at conversion and fallout providing a feature to make v

Description - Analysis Workspace should allow extraction of over 50k rows which can be shared/scheduled by email to recipients.   Why is this feature important to you - This feature was available in Report and Analytics but has been discontinued. This was extensively used by users and cannot be replaced by Data Warehouse dues to limitations on metrics and segments.   How would you like the feature to work -  1) Analysis Workspace provides the ability to extract more than 50,000 rows of data. Users should be able to customise the exact number of rows they can extract. 2) Analysis Workspace should enable sending/scheduling of the extract data by email.  Current Behaviour - Currently in Analysis Workspace up to 50,000 rows can be extracted only at an item level instead of project level, And this extraction cannot be shared/scheduled by email.

Description - Append date range to file name for workspace project Why is this feature important to you - It will give the instant idea to report consumers of which date range the report refers to How would you like the feature to work - Append project date range to file name in workspace like we do in reports now Current Behaviour - No option to append date range to file name in workspace

To use Dimension as filters in AA, you have to go into the desired dimension or segment and select the item/s you want then drag it/them to the filter box to make single filter or a dropdown (Shift + drag multiple items). Some of the items are listed by rank (hits), others alphabetically, which can be good for one use and bad for another. Ideally, the user could toggle that behavior in the selector.   Examples: We have a Product classification for internal Business Groups. If I create a table of Product orders by Business Group, then the rows appear ranked by the metric. If I want to add a dropdown filter with Business Groups alphabetically, I have to go into the dimension, search for items one by one, then either Ctrl + Select and Shift + drag a group, hoping I don't make a mistake in the middle of it, or else individually search and drag one at a time. So here, I'd like sort the list alphabetically.Conversely, we have another custom dimension set up for the user's

Issue: The Adobe Experience Platform Web SDK extension with the Redirect with Identity Action Type changes the original behavior of the link click. For example, if your link was supposed to open in a new tab, the current Adobe code will open the destination link directly in the current window, which impact the user experience, not great at all!   Solution: Adobe should offer to their clients the choice of how the Adobe Experience Platform Web SDK extension with the Redirect with Identity Action Type should behave. Such as Google Tag Manager where we have several options: AutoLink Domains: Once all domains are defined by default GTM will append a query string to the destination URL (instead of opening the link directly in the current window) Use Hash as Delimiter (optional): If we want to track the google id as an hash tag ‘#’ instead of query string. Decorate Forms (optional): If we have a form which migrates the user to other sites, on submitting. This field shou

Description - Requesting some form of client notification when background automated processes are run that could materially impact workspace reporting data.  Specific example would be the cleanup of 'badIDs', as defined as IDs that have X% of activity against them (clearly well beyond normal customer behavior levels) and need to be removed from workspace to avoid performance degradation.  Notification allows the client to assess potential impact on insights/analytics reporting and notify appropriate stakeholders as needed that data may not be directionally accurate in representing customer behavior. 

Within Workspace, could we get another download option (or maybe even two more?) to enable csv download to include a) collapsed panels/tables and b) hidden tables? Once you get to a certain size with Workspaces view they can get very laggy, at which point defaulting panels into a collapsed view can be a good way to assist navigation across the report. However for stakeholders that may also want to download the Workspace data it can become a time consuming, and off-putting, task to manipulate the view as they need it for download. Its a similar point for the hidden tables where a user may want to extract hidden data to re-use elsewhere. 

Our business relies on Adobe Workspace reports and the ability to export these reports to other users and other platforms. The recent change only allowing users to schedule daily reports for a maximum duration of 30 days is creating an incredible amount extra-work for our users, and causing us to re-evaluate using Adobe reporting tools in general.    The ability to schedule exports of daily reports for more than 30 days (and ideally up to a year) is important because it allows our business users to connect our Analytics data with other data sources (wordpress, marketing, affiliate), and to make decisions and observations using advanced dashboards.    We are very disappointed in Adobe's decision to cut costs by limiting users important activities, and hope they will reverse course on this decision.  Currently we are looking at wasting many hours every month re-scheduling reports we KNOW we will be needing and using. 

Currently regardless of where you apply the Background > Conditional Formatting setting (an item in a table that spans several columns, or a single column) the formatting works the same, applying the colour scale for each column individually. However sometimes it might be more useful to apply this across multiple columns/cells instead, but this is not possible today. My suggestion is that if I click the settings cog on an item that spans multiple columns the formatting gets applied to all cells in those columns as a single group of numbers. The resulting formatting can be very different. For example, you can see in the mock-ups below that applying the formatting to each column individually produces a very different result to applying it to the group of cells as a whole:   Alternatively, add an option under the conditional formatting to allow it to be added to all columns/cells as a group, or on a column by column basis.Adding this feature would make it far easier to create cro

Description - In the Analytics for Target widget, when the panel is built, show the Conversion Rate in Percent number format, rather than Decimal.   Why is this feature important to you - The Percent number format more intuitively conveys Conversion Rate since it is a calculated metric of conversions (%). And, if it were Percent by default, would save me time in building test reports. The Conversion Rate is not very useful to my team presented as a Decimal, which is the default. Currently, when I create a report of test results using the excellent A4T widget, I change the Conversion Rate's number format every time from Decimal to Percent manually.    How would you like the feature to work - The A4T test result panel would be built exactly the same way it is today, with the one new change that by default sets the Conversion Rate's number format fas Percent, rather than Decimal.   Current Behaviour - Conversion Rate is currently displayed as a Decimal.    T

I got a renewal notice the other day for a daily delivered workspace saying the schedule was set to expire in 30 days.  When I went to extend it for another 12 months I found that the max possible end date was only 30 days away.  Adobe Support confirmed this is a new setting for the feature, which means i will now have to frequently update the end dates for dozens of daily dashboards sent throughout my company.  What's more, why send me a 30 day notice when I can only extend it one additional day.  Since Adobe seems resigned to this new functionality, I suggest the following minimal changes: 1. Allow daily reports to be scheduled 90 days into the future (not 30) 2. Send the renewal notice at end date minus 7 days (this still may get missed if I'm on vacation but better than it is now)

Currently the only way to send analytics datafeeds to a Aure Blob storage is by sharing storage keys & account details. We see this as a security risks to our azure  accounts. A way around this is to  use SAS tokens to give access the Azure BLOB container storage via CLI(Command Line Interafaces). Could this option be added to Analytics Data feeds.

Description - Why is this feature important to you - Implementation issues can sometimes lead to event metric set wrongly. In order to improve data quality, we need a solution to repair/delete custom events for data collected historically. How would you like the feature to work - We would like Data repair API to repair custom events. Current Behaviour - Data Repair API only supports repairing dimensions (eVars, props, activity map variables, etc)