Adobe Analytics

Hello, My team recently enabled eVars that track cookie opt-in/out information for three cookie categories. For each of these, if a visitor opts out of a category and then opts in, we'd like to be able to segment visitors by their most recent selection. Do you know how to build a segment based off visitors' most recently defined eVar value? Thank you,Ben

Say you wanted to determine how many errors a typical visitor would encounter when browsing a site, what would be the calculated metric you would use? So, for example a typical visitor is likely to see 'X' error upon every 10th visit but then also 'Y' error upon every 15th visit. How would you be best show the likelihood of a visitor to see that type of error? 

Hi, is it possible calculate Dwell Time in Adobe Analytics?   I created a metric with time spent per visit divided by visits but it doesn't work.   Thanks

Hello Experts, There is around 20% page view and unique visitor data in the session refresh marketing channel of an e-commerce website. This data is originating from Safari browser on Mac and iOS 16.5.The other reasons like page load time, redirects, cross domain etc are rules out in our case. is something related to ITP causing this issue? Have you as well experienced the same? What could be the fix for this? Many Thanks

No text available

We're seeing strange data coming through for Last Touch Channels. After correcting how the referring URL was passed into link tracking, we saw a surge in Natural Search as Last Touch, however the vast majority of this surge has a Tracking Code and/or query param that should pass an upstream rule. Assuming that our order is:Paid Search (any)Matches Paid SearchTracking Code contains 'SEM'DisplayTracking Code contains 'ABC'Natural Search (any)Matches Natural SearchTracking Code contains 'SEO'And if the hits have referrer='www.google.com' and Tracking Code='ABC', we'd assume that it would be labeled as "Display" because of the order, but these ends up going into the "Natural Search" bucket.  Has anyone run into this before or any thoughts? Our next step is change the order, but eager to hear if anyone has tested this situation.Thanks!  Natural Search definition: https://experienceleague.adobe.com/docs/analytics/admin/admin-tools/manage-report-suites/edit-repor

Hello Experts,In my Advertising Analytics report for Google Ads- the video Ads type are not tracked. ONLY text Ads are tracked. What could be the reason for this? I read in one of the post that Advertising Analytics only track text ads type with the integrated Google Ads accounts. is that still true and not updated in latest releases?

Hi, we created a new reportsuite (for testing) for the mobile SDK implementation and all the implementation has been done and mapped new reportsuite to the Analytics service in Datastreams. Lifecycle metrics and visits data are captured in new reportsuite, but standard page data is unavailable in new reportsuite. I created a rule in Tags property by following this article's steps https://developer.adobe.com/client-sdks/documentation/user-guides/getting-started-with-platform/rules-and-xdm-events/ and tested in Assurance debugger as per mentioned article, and for reference, you can see AEP request in the attached snapshot. Note: we configured Adobe Analytics extension with the existing (development and prod) reportsuites in the same property

Hi, We've got a few 429 errors from https://analytics.adobe.io/discovery/me recently. I understand from https://developer.adobe.com/analytics-apis/docs/2.0/guides/faq/ that> The enforced rate limit for API calls is 12 requests every 6 seconds per userBut we only do about 100 requests per day, and on the times when we got the error we'd done no other requests for several minutes. We haven't got 429 from any other endpoint.So is there another rate limit being applied? Perhaps this endpoint is special somehow?Alternatively, we share the OAuth Server-to-Server credentials with other teams; are we sharing the quota with them? Or does it apply per access token (which we're not sharing)? I.e. what does "user" mean in the docs above?Thanks for any help.

Hi everybody!I need to create a venn chart where I have the users from our app, the web, and the users that end up using both mediums.We have a universal report suite and an eVar (in that RS) that gets each report suite separately (app and web). So I created two separate segments with our app and web RS but once I create the venn chart, it did not show me the users that cross over between those channels. how can I be having this visualization properly?

Hi Team, Please Help me with the following doubts.  1. My Direct Numbers are so high compare to other channel that is not expected coz most of the traffic should comes from campaigns2. When we break down to understand the direct, I can see other domains like Facebook and google. Is it right way to breakdown and if yes why we are getting other domains in Direct channel.Pleas find my Marketing channel processing rule order for  your reference.3. Do we need work anything on Internal URLs, Since we are tracking two different site(sitea.com and siteb.com) of the same org in this one report suite, Internal ULRs I would like to know the why it is happening, what could be the root cause for these? Direct Config: Internal URL Filter setup: Thanks!CCing Top contributors for faster Response: @arunpatidar @jennifer_dungan @yuhuisg   

Hello together, my company uses the DataFeed Export via SFTP to load the tracking data into our Data Warehouse. I recently adjusted the data feed (added one more eVar to export) and started an export of a historical timerange. When we loaded the data into a table and compared the amount of records from the historical export to the timerange we imported via daily export we had a difference about nearly 1.000.000 hits for a time range of nearly one month ( 89.651.013 hits loaded via daily export for that time range vs. 90.596.309 hits in the manual historical export).I would expect to receive the same amount of hits for the same time range. Do you have any idea, why the amount of hits differ? Best regards,Sebastian

Good morning,I only work with AEM for a short time. My question is - can you see how much interaction per page is related to videos only?How do I need to query this?Thank you!

Hi,I'm trying to schedule a report builder file to be sent out.  The file executes fine when I hit "refresh", but when I try to schedule it the report fails due to the an "unsupported date cell formula. Change the request to a supported function". I'm not sure why this error is thrown because the report executes if I manually run it.  The error code is 8004, but I can't find a mapping of error codes in the docs. Has anyone experienced this problem / know of a solution?

Hi Experts,Is it possible to get real-time data in Analysis - Workspace ?I know this can be done in Analytics Dashboard. Thanks,PV

If sending both Website and Mobile App data to the same report suite, giving the default time-out rules are different in both channels (30 mins on Web, vs. 5 mins on App), do we need to set the same time-out rule for both channel? If so, then how can we re-set it? Thank you. 

Hello, does anyone know what happens with Real-Time reports under Reports once the Beta landing page is fully rolled out? I can't see this report currently in the Beta version. Thanks!

Hello, I am currently working on a dashboard that has aggregated multiple Target Activity > Experience tests. For this exercise, I created a segment that aggregated all the control groups across the test and I also created a group for all the exposed audiences. (I know this is not the best practice, but the client wants an aggregated dashboard). After I created these groups, I noticed something off, when I put these segments into a freeform and then add Target Activity > Experience as a subgroup, I am noticing Test Activity > Experience line items that were not included in the segment. Does anyone know what the issue may be and how to fix it?

I need to focus on Exit Link for some Data Repair API requests. Adobe Documentation suggests "pageeventvar2"  to reference the Download link, Exit link, or Custom link dimension (see below). However how do I specifically focus on Exit Link?https://developer.adobe.com/analytics-apis/docs/2.0/guides/endpoints/data-repair/json-body/#variables 

Hello! I have a specific set of Marketing Channels that depend on the tracking code to categorize traffic. I can see traffic on all of these channels. However, if I do a breakdown by Tracking Code, I get a large chunk of all metrics attributed to "Unspecified".   Below is a screenshot of this ocurring with Paid Search:   What could be causing this? I ran Omnibug and sent tagged traffic to my site. I can see that, on the first visited page, the xdm.marketing.trackingCode is filled with the correct CID, but on subsequent page views the field comes up empty. Is this the intended behaviour? All your help is much appreciated, this is driving me a little insane. Thank you so much for any guidance you can give me :)! All the best,  Diego @pratheeparunraj

Good morning , I wanted to ask you if you have any explanatory video or presentation on how to proceed to upload files from an excel format to the Adobe platform. According to the process I have done so far, I have prepared the file with the specific characteristics of the platform, secondly, I have created a new event and added it to one of the eVars I had before. I would like to have the full documentation of it. Thank you very much.

 Hey Community Members, Our team is currently working on updating the website's design. As part of this update, users will be asked to answer a few single-choice questions. To collect this information, I am planning to record their selections upon clicking the "complete" button. Initially, I thought about using an eVar but it may not be suitable for future surveys with more questions due to character limitations. I am considering using a list variable, but since I have not used it before, I'm open to other suggestions. Are there any alternative options I can explore? Thanks,Skal  

My site had an influx of bot visits from April 26th-June 6th. I was able to create a new bot rule to exclude the user agent in the future. However, is there a way to retroactively exclude/remove this data?