Hello @amccabe82 , You may use "AND" logic to further prohibit any bot
traffic but AAM maintains a flag at device level and any suspicious
device gets marked as flag. With this flag being set, the device won't
be considered in the segmentation process.
Hello @Varun_Kalra , Hope you are keeping well! 🙂 Offline ID sync
enables us to sync the cross-device Ids and make the offline IDs to be
available for targeting. It doesn't map data of the existing
cross-device Ids to the new cross-device IDs. At the end of ID sync file
processing, we get only devices linked to new cross-device Ids.
Hello @v-hapan , Thank you for writing to us! I hope you are keeping
well 🙂 Before I start with the explanation, I would like to outline
that d_unsid parameter which is responsible for removing any device/CID
from a trait can't be used in real-time. However, you can use d_sid to
qualify for any trait in real-time. Currently we do not support
real-time trait removal. d_unsid can be used with file ingestion to
remove traits from any profile. Coming back to query, assuming that our
segment has onl...
Hello @Matias22 , AAM does not provide any OOB feature to act as Consent
Management Platform however Audience Manager offers you tools to help
support your ability to obtain the required consents from your users, so
that you can deliver personalized experiences to them across channels.
Please follow this article to know more about such options. I hope this
helps. RegardsAnkita Sodhi
Hello @MatiasBk , With iOS14 we do get privacy controls. Adobe Analytics
and Audience Manager also provide you with the opt-in flag that you may
use to control the data collection. You can control whether Analytics,
Target, and Audience Manager activity is allowed on a device by using
the following settings:privacyDefault in ADBMobile JSON Config .This
setting controls the initial setting that persists until it is changed
in code.setPrivacyStatus method.After the privacy setting is changed by
us...
Hello @kmastana , This is very interesting scenario!I believe that you
can make use of Data transfer Pixels to send data to AAM.Please try with
this approach, I hope this should help you with the given use case.Also,
please ensure that depending upon the requirements you are adding d_cid
parameter, if needed.
Hello @TimeIndicator1 Profile Merge Rules are considered whenever we
talk about segments. Seeing a low overlap is generally due to less
number of common UUIDs but it would need further investigation. You have
mentioned that in the AdServer you are seeing good amount of
data/overlap however in AAM the story tells otherwise, so it would be
great if we can connect via Support Channel so that we can investigate
this data on both sides.
Hello @TimeIndicator1 , I think it would be great if we can connect via
support channel so that trait/segment can be investigated in detail. I
request you to please connect with us via amsupport@adobe.com or
clientcare@adobe.com and we will work on this one towards resolution.
Hello @Mrugesh_Soni , Traits and Segments have minimum size requirement
to be able to appear in overlap reports.A segment must contain a minimum
of 70,000 total real-time users during the last 14 days. Read more about
Minimum Unique Visitor Requirements for Traits and Segments .A segment
must have been created prior to 12 AM Thursday UTC (2 full days before
the weekly overlap report update process begins).Reference DocumentIf
segment is in alignment with above said requirements and if it still
d...
Hello @JMK , This response is a standard to share data from AAM to
AA.Dests parameter will be present whenever there is any URL destination
being returned based on the AA request data set. As per my knowledge, HR
is used for numbering the calls and ID is to show the IDs that have been
synced with 3rd party data partner along with the timestamp parameter.
Again, these are for internal purposes/usages. As per your query, you
are debugging URL destinations, so is there any particular
issue/scenario...
Hello There, This could be just a delayed reporting scenario. Please let
me know if you still are seeing the same thing and we can connect via
support ticket.
@franciscor35820985Thank you for reaching out to us!Please find the
below inputs from my side:Question1 - You can tie article and date but
the date here will be considered as a string only. AAM doesn't identify
date as an DateTime object and all the values are treated as string
only. If you are storing date as a string at your end and would like to
send this information to AAM then you can do so post which you can
utilize this information to create traits/segments as mentioned in your
example.Qu...
Hello There,MID is the Experience Cloud ID similar to UUID and this is
not a replacement to DPID.DPID is your custom identifier to uniquely
identify any user and MID is the device level ID which gets assigned to
one browser/device when a user visits the website.You can work with MID
only when it comes to sharing data across Adobe Experience Cloud
Solutions i.e. Analytis, AAM, Target and Campaign. If your website has
Experience Cloud ID Service implemented then you can use MID as well to
target a...
Hello snehaa30982388,Thank you for reaching out to us.Unfortunately,
there is no one guide available for the preparation which can be shared
but you can follow this forum post which contains multiple reference
URLs around the Product and Certification.
Hello caseyo84500701,Thank you for reaching out to us.Data share via
S2S destination doesn't depend upon the PMR or Customer ID sync but it
is dependent upon the ID sync with 3rd Party.PMR comes into picture only
within AAM and that depends upon the type of porfiles which you would
like to target.As you have mentioned that traits are realized based on
the ingested data and Customer ID sync is enabled, I assume that you are
targeting users in their Authenticated profiles. So, in this case you
sh...
Hello @stevemalkoThe exports mentioned above can be setup by Customer
Care only and there is no additional cost for this.If you wish to setup
these export then please reach out to Customer Care via
amsupport@adobe.com with following information.1. Company Name or PID2.
DatasourceID for which this export is required.3. If you need segmentID
along with the CRMID.
Hello There,Thank you for reaching out to us.I understand that it is
hard to identify the data when it is coming from a 3rd party data
provider but you can always make use of "Error Sampling" flag which will
give you sampled data from the onboarded file under Onboarding Status
Report.This flag needs to be enabled for the specific datasource into
which data is being onboarded and from the next data ingestion, you will
be able to see this sampled information.For more information about this
flag, p...
Thanks trevor1992 for showing interest in the Beta program and for this
you can reach out to your CSM/Account Manager.And, I am really sorry to
hear that you are not able to fully utilize the solution due to
limitations. Would you be able to share a few here or you can always
submit them as a new idea.
Hello trevor1992,That would be a nice feature to have. I request you to
please submit this as an Idea so that Product Team can look into the
details and can include this in pipeline, if this is feasible.You can
submit this as an idea on Audience Manager - Ideas forum.
Hello Victor,Yes it is possible to see same cookie in the browser but
here we should notice the domain on which these cookies are set. Being a
cookie destination, I think you have settings to set this cookie on all
your domains due to which whenever you access your websites and make a
call to AAM, it replies back with sgpj_0 cookie. With all the websites
running on different domains, this cookie is getting set on each one of
them.I hope this helps, please let me know your thoughts.
Hello glennb29356951,Before I can answer this question, I need to know
"how you are identifying users across all these devices?"Are you
identifying yourself as a single user from all three mediums?
Hello glennb29356951,Based on the given description, I understand the
following:1. You have signed up for Loyalty Program using your gmail
address.2. You also access App from your Mobile Device.3. You have opted
to receive messages from your company on your coporate email address.In
the above use case, there are 3 identifiers which are being used to
identify you as a person behind all the active across devices.If you
have Adobe Campaign integrated with AAM then all this information is
being sen...
miguelo39742934,We do send a delete flag when a user gets removed from
a segment in some cases such as with Google but not all the time and
that too via S2S destination only and not with URL or cookie
destinations.Purging in 3P system is completely dependent on their side
as we, from AAM, end can't control this stage. This is because of the
Time To Live for this profiles in 3P platforms.
Hello Kapil-Sokrati-ITC,Thank you for writing us!Currently AAM does not
allow to export names of traits/segment. You can only get the IDs. You
can make use of APIs in case if you need trait/segments details. Please
follow this documentation to know more about the APIs.I hope this
answers your query, please let me know for any additional question on
the given matter.
Hello miguelo39742934,Thank you for writing to us!Please the inline
inputs from my side:1.- If I delete a segment in AAM that was pushed to
a destination, the segment is also deleted in the destination or the
segment need to be deleted itself from the 3rd party platform?[Your
understanding is correct. You need to manually remove the segments from
3P systems. However, there are a few 3P data platforms which allow
deleting segment feature as well such as Google S2S destination but this
is not the...
Hello PratheepArunRaj,Thank you for looping me in.I understand that you
are willing to upload data from another DMP into AAM which has country,
segmentID, Name and description.Please have traits created as
sid="segmentID" of type onboarded and keep a signal in file as
sid="segmentid" so that the respective users can be mapped correctly
these traits.If ID sync is not already done then you can upload these
users and keep the datasource type as cross-device+inbound(CustomerID)
so that these custom...
Hello glennb29356951,Thank you for reaching out to us!Integration with
DCM involves either implementing pixels or onboarding log files.If you
implement pixels then each pixel will make a hit on AAM DCS server which
will increase the server calls.If you want to work with log ingestion
then you can onboard log files from DCM into AAM at no additional cost
(ALF pixels are not billable) but if you turn on AOR(Audience
Optimization report)/trait/segment creation using this data then billing
will sta...
Hello madhum20,Thank you for reaching out to us!As per the description,
I understand that you would like to opt for any of the below ways:1.
Merging data in AAM from 3 different business lines.2. Merging data from
3 DMPs into 1 DMP.I would like to update you that merging data 1 or more
AAM accounts is not possible.Within your AAM instance, you can have
multiple datasources which will capture data from individual business
units and within the same AAM instance, you can merge data from these
thre...
