Hi Shivani, Hope you are doing well! Please refer to this - https://docs.adobe.com/content/help/en/experience-manager-65/assets/administer/performance-tuning-guidelines.html It might help! Warm Regards,Nidhi Priya

Re: Using Experience Fragment in Adobe Campaign Classic nidhip010816 - Adobe Experience Manager

Hi @Shaheena_ACC This might help you - http://experience-aem.blogspot.com/2019/05/aem-64-creating-dynamic-emails-using-experience-fragments-for-delivery-using-adobe-campaign.html Best Regards,Nidz

Re: Package Manager - upload file sometimes doesn't work nidhip010816 - Adobe Experience Manager

Hello @fionas76543059 Which version of AEM are you using? Also, check in the developer's console if you see any error when you weren't able to select file. Please mention the error trace, it will help in the investigation. Also check error log if there is any error. Maybe if you aren't on the latest version of AEM, move to the latest version of AEM and try with a different browser. Warm Regards,Nidhi Priya

Re: AEM Learning References nidhip010816 - Adobe Experience Manager

Hello Mayank, I hope you are doing well! As a beginner,1. Start with - https://docs.adobe.com/content/help/en/experience-manager-learn/cloud-service/underlying-technology/introduction-architecture.html , It will give you basic understanding of architecture and technologies used.2. These tutorials will help you in kick starting Development tasks - https://docs.adobe.com/content/help/en/experience-manager-learn/getting-started-wknd-tutorial-develop/overview.html3. you may watch the Gems session re...

Re: publish a whole site AEM 6.5 nidhip010816 - Adobe Experience Manager

Hello @key-key Tree Activation could be used for the use case you have - https://www.cqtutorial.com/courses/cq-admin/cq-admin-lessons/configure-cq-replication/cq-activate-treeNote - Now tree activation is done from /libs/replication/treeactivation.html But since you need to publish the whole site, you may want to do via Package method. Just create a package of your site and install it over destination instance. Hope this helps! Best Regards,Nidz

Re: Error related to ecmascript 6 while building pipeline... nidhip010816 - Adobe Experience Manager

Hello @asn_india The /libs/clientlibs/granite/coralui2 node has a jsProcessor property set to "min:gcc". This means that this property takes precedence over the configuration in the HTML Library Manager. And this somewhat explains this - "This language feature is only supported for ECMASCRIPT6 mode" Although, It would be great if you log a ticket where a Support Engineer could work with you by looking into your Cloud environment. Hope this helps! Warm regards,Nidz

Re: Upload and Build package failing in Chrome nidhip010816 - Adobe Experience Manager

Hi @viveksachdeva , This is a known issue which is currently being worked upon by AEM Development team under internal ticket ID -- GRANITE-30226. This is specifically seen with browser - Google Chrome(83.0.4103.61). You could test this on any other browser and it should work fine for the time being. This has been fixed for AEM 6.5.6.0 (Releasing on Sept 3rd, 2020) & AEM 6.4.8.2. [NPR-33714], I hope this would help your concern. 🙂 Warm regards,Nidz.

Re: How to configure the Search Forms Component? nidhip010816 - Adobe Experience Manager Assets

Hello, Yes, You can add Columns for Asset Search by going to - /libs/dam/gui/content/commons/availablecolumnsYou may override /libs/dam/gui/content/commons/availablecolumns and add/remove nodes in order to customise search result. I tried and guess it worked, See - I hope it would help! Warm Regards,Nidz

Re: what is the recommended way to customize workflow ins... nidhip010816 - Adobe Experience Manager

Hello Nagaraju, It seems you are trying to customize below screen - If you follow the path in crx/de it's marked as Protected - It's highly recommended not to make any changes to the areas declared as 'Protected'. If done, any issue arising from the same that might not be supported further by Adobe. You may do a custom implementation however. Warm Regards,Nidz

Re: Unable to upload package in fresh local AEM 6.4 instance nidhip010816 - Adobe Experience Manager

Hello Pradeep, This is a known issue which is currently being worked upon by AEM Development team under internal ticket ID -- GRANITE-30226. This is specifically seen with browser - Google Chrome(83.0.4103.61). You could test this on any other browser and it should work fine for the time being. This has been fixed for AEM 6.5.6.0 (Releasing on Sept 3rd, 2020) & AEM 6.4.8.2. [NPR-33714], I hope this would help your concern. 🙂 Warm regards,Nidz.

Re: How to customize content fragment in AEM6.4 nidhip010816 - Adobe Experience Manager

Please try to follow these articles, This would help you - https://docs.adobe.com/content/help/en/experience-manager-64/developing/extending-aem/customizing-content-fragments.htmlhttps://www.youtube.com/watch?v=-Hn3UDJMc98 Warm Regards,Nidhi Priya

Re: Regarding creation of system user nidhip010816 - Adobe Experience Manager

Please try to loging and then check if it works? Warm Regards,Nidz.

Re: java.lang.NoSuchMethodError: org.apache.poi.ss.usermo... nidhip010816 - Adobe Experience Manager

Give this a try by changing the dependency - poi-ooxml Warm Regards,Nidz.

Re: AEM Page Editor error : Handler of component is inval... nidhip010816 - Adobe Experience Manager

Hi Santosh, Please try to rebuild the clientlibs by going to the URL[1]First click on Invalidate Cache Then click on rebuild clientlibsWarm Regards,Nidz[1] http://:/libs/granite/ui/content/dumplibs.rebuild.html?rebuild=true

Re: AEM6.3 (SP2) Current live copies don't show up on all... nidhip010816 - Adobe Experience Manager

Hello Srinivas, I could not find any specific page where Blueprint was not seen but Rollout command on the blueprint page depends upon on whether a source is referenced by blueprint configurations. If you create a live copy from a source page that is referenced in a blueprint configuration, then only Rollout option will be available in the page information. Blueprint configs are available at http://localhost:port/libs/wcm/msm/gui/content/blueprintconfig.html or http://localhost:port/miscadmin#/e...

Re: Tag is not getting created inside /content/cq:tags in... nidhip010816 - Adobe Experience Manager

Hello,I checked on latest AEM 6.4.8.0. Tags are getting created in /content/cq:tags - Warm Regards,Nidz

Re: Live Copy Specific Content was not appearing/removing... nidhip010816 - Adobe Experience Manager

Hello Partha,I hope you would be doing well! I remember a customer had raised a similar issue with AEM 6.5.2 where when they add a component on Live Copy and then add the similar component on Blueprint, After rolling out of the Blueprint Page, the similar component got added from Bluprint to Live Copy but the Live Copy component was deleted.I will add my finding from the case. 1. This was specifically happening with Page Roll Out not Component Roll Out. i.e. with Page Roll Out the Blueprint comp...

Re: AEM 6.3 Query builder - How to search for case insens... nidhip010816 - Adobe Experience Manager

Hey, You may do a custom implementation for this. The below doc may help - https://helpx.adobe.com/experience-manager/6-3/sites/developing/using/implementing-custom-predicate-evaluator.html This one is not Adobe Doc but seems it will match your use case -> http://experience-aem.blogspot.com/2015/05/aem-6-sp2-query-builder-predicate-evaluator-ignore-case.html Warm Regards,Nidz

Re: 6.5 Page Property Image Drag and Drop nidhip010816 - Adobe Experience Manager

Hi, The paradigm that consists of drag and dropping assets has been replaced by the use of a path browser. It could be used by navigating to /mnt/overlay/wcm/core/content/sites/properties.html?item=/content/we-retail/language-masters/en -> Selecting the Thumbnail tab -> Click on the Select Image button Internal JIRA ticket reference : CQ-4270286 Warm Regards,Nidz

Re: Bulk renaming of assets in AEM using CSV nidhip010816 - Adobe Experience Manager Assets

Hello, You may try to use - Renovator - https://adobe-consulting-services.github.io/acs-aem-commons/features/mcp-tools/renovator/index.html It assists the author in moving or renaming content in bulk. I have never given this a try but it might help you. In case csv is not concerned, you may just go to /damadmin#/content/dam/yourAssetFolder and try to move the assets, It has an option to Rename also. Hope this helps! Br,Nidz

Re: Unused AEM Assets nidhip010816 - Adobe Experience Manager Assets

Ways by which you could find if an asset is used or not - 1. Go to host:port/damadmin, select asset for the asset -> Go to Tools -> references.2. You may use filters by going to host:port/assets.html/content/dam -> Select asset and use 'Filter' present in sidekick at left 3. There is no OOTB functionality for this but if you are intrested in custom implementation, this post might help you ->https://stackoverflow.com/questions/35187627/how-to-find-unused-images-from-cq-dam Hope this helps! ~Nidhi

Re: Timeout Handler not working in AEM 6.4.2 nidhip010816 - Adobe Experience Manager

Hello,The time that you put in the 'Timeout' field will make the step to be executed automatically after thespecified time, only if you do not approve the workflow step from admin or the designated user to approve.To use,1. In the Waiting for Activation step, provide the desired timeout value in Timeout Field.2. In the Timeout Handler field, choose "Absolute Time Auto Advancer" (If you want the step to be executed afterthe time specified, make sure that the admin does not approve the request in ...

Re: Crxde lite query or home search does not show any res... nidhip010816 - Adobe Experience Manager

1. Could you please check LastIndexedTime time from JMX console ./system/console/jmx --> IndexStats (This shows that when was last time index got updated).It should not be stale. 2. Also, try getting Debug level log on below index APIs - - org.apache.jackrabbit.oak.plugins.index- org.apache.jackrabbit.oak.query- com.day.cq.search while you search. It will give a clear picture on what might be causing this. If nothing helps, feel free to open Daycare ticket 🙂 Cheers,Nidhi.

Re: Crxde lite query or home search does not show any res... nidhip010816 - Adobe Experience Manager

Hello Chinmay, Which version of AEM are you using? I tried this search in my OOTB instance and was able to see result. Screenshot attached - Also, you can use AEM query builder API (host:port/libs/cq/search/content/querydebug.html) to search from JCR. You will get the result in JSON format.

Re: Give Upload/Create only permissions to user in AEM nidhip010816 - Adobe Experience Manager

Hello niks1020,Jorg is correct. You need to add 'Modify' permission also. I tried adding 'Modify' permission along with Read and Create permission to the group and I could see 'Create'button visible in /assets.html/content/dam but without Modify permission create button is not visible.Give this a try!Best Regards,Nidhi Priya

Re: Restrict folder access in aem nidhip010816 - Adobe Experience Manager

I think this could better be done with permission restriction in AEM. Have you reviewed [1] ? Details on how to set permissions, including replication privileges is described here.[1] : https://helpx.adobe.com/in/experience-manager/6-3/sites/administering/using/security.html#ManagingPermissions

Re: Queries Response is faster in 6.4 than 6.2 nidhip010816 - Adobe Experience Manager

Index health plays a vital role in Query performance. There were some enhancements in AEM 6.4 in the field of indexes as described below.- OAK Run Tool : The Oak Run tool has been added with a new indexing mode, which you can use to handle almost all indexing use cases, without having to move to JMX. You can re-index your content using this tool. Apart from that this tool gives you out of band support for re-indexing. That means, if you have limitations on your running production environment and...

Likes from

User

Count

Guidelines

Cookie preferences