Hi Experts,We have TarMK Cold standby setup for our Author environment
(AEM 6.3 SP3) and facing Consistency issue on standby server, please
suggest if someone have similar experience - Background: The standby is
created by copying the installation directory of Primary.We have
external NAS storage for segmentStore and dataStore so, I copied that
too while creating the standby environment.Before starting the standby,
deleted the sling.id.file from installation directory and assured that
dataStore ...
Hi Experts,We’ve setup the Cold-Standby for AEM 6.3 Author environment.
Everything is working well – content segments/binaries synch up, logs
are ok etc. Main Author server is in Primary mode, Secondary Author is
in Standby mode. Have I’ve below BAU deployments related question and
need your experience/feedback -Use Case: Say there is a Release1
happened on Primary Author, the same needs to be deployed on Standby
Author to keep both servers in sync in terms of code as well.Question: -
We are usi...
Hi Kunwar,Could you please suggest the location of sling.id file in
crx-quickstart directory?I am also setting up new cold-standby and
installing the primary and standby from scratch on two different hosts.
Do I need to be worried about sling.id as both are separate instances
from scratch by unpacking aem jar. Please suggest, thanks!
Thank you Vaibhav. We followed the AEM 6.3 steps shared by you. Though
it took couple of hours as repository size was huge but finally, it
fixed the issue.But still there are some exceptions in logs, I'll check
if those are application specific or content. I'll get back to you if
any more help is needed. Thanks!
Yes, we tried this helpx article but it is NOT applicable for AEM 6.3.
Oak 1.6.1 doesn’t support “-d1 -p” parameters.Do you have it worked for
AEM 6.3 before, might be we are missing something?
Hi Experts,We have AEM 6.3 with SP2+CFP1+CFP2 installed, Few days back
some data was migrated using CRX2OAK tool but the system was working
perfectly fine. Seems like the server got rebooted without AEM shutdown
and when we are starting the AEM server back again, server is not
starting properly. I am able to access system/console but crx/de or any
other console is not accessible. Below exception are the exceptions from
error.log - ERROR [FelixStartLevel]
c.a.c.d.i.DeserializationFirewallImpl
(De...
Hi Experts,We want to bypass a specific url from custom authentication
handler means whenever this url is browsed, it should not be
authenticated. I am using standalone AEM server so updating tomcat
web.xml is not possible. Another way, lot of post says to update "Apache
Sling Authentication Service" configuration and allow anonymous access
with the url (with -/ prefix) but, somehow it is not working for
me.Wanted to do this through code in the custom authentication handler
where Path value is g...
Dear kautuksahni,In the second reply, you had mentioned Ratna answered
the query. But, I am not able to see Ratna's reply. Could you please
either re-post or provide the pointer to Ratna's answer. It would be
great help, thanks!
Hi Experts,Going through the various approaches for migrating huge
content/assets (1 TB) from legacy in-house AEM platform to AWS hosted
new Cloud platform. There are lot of approaches suggested in blogs like
Package Migration (recommended from smaller
repositories)ReplicationCRX2Oak toolVlt RCP (read about its limitation
that it work with http only and not with the servers having https
protocol)Grabbit Could someone please guide, which one is the Adobe
recommended approach for migrating reposit...
Hi Experts!For one of our client, we are upgrading the platform from AEM
6.1 to AEM 6.3. There can be two approaches -(1) Upgrade from AEM 6.1 >>
AEM 6.2 >>AEM 6.3 (Through AEM 6.2)(2) Upgrade from AEM 6.1 >> AEM 6.3
(Direct)Could someone please share their experience or recommendation
which would be the better one. It would be great help, thanks!
Thank you very much Jantzen, I was fully confident that you'll surely
reply on this thread to provide right direction as usual. Perfect, I am
totally aligned with your direction for using SSF and creating hybrid
segment in AAM. Kindly mark the post closed. Thanks!Thanks &
Regards,Deepak Jangra
Hi Experts,There is a requirement for capturing the real time signal
(online trait) from website and passing it to Audience Manager for
creating Rule based traits.Based on the Adobe documentation, the web
beacon (say event5 for purchase completion) should be pass to Analytics
first and then using Server Side Forwarding, it will be passed to
Audience Manager. I’ve done the same POC and able to receive the
analytics signal in AAM for creating corresponding traits and segments.
It is working proper...
Hi Team,We've implemented the AAM using Marketing Cloud services through
integration code. Facing one challange because some of my website users
are qualifing for expected segments while others are not even after
these other users have same qualifing traits.On troubleshooting I found
that my audience manager call for retrieving the segment is going to
multiple dcs_regions (server side forwarding is implemented and I am
seeing these multiple regions in analytic call response). Validated that
some...
Hi Team,The system is up and running with existing datasource, traits,
segments, destination and profile merge rules. But, there is no proper
naming convention followed so, I want to update the name of all building
blocks. I've few doubts -I know the name change at one place will
automatically take place in consumers e.g. if I change the trait name it
will change the trait name in Segment definition also but, is there any
thing else I should take care while changing the name for the -
datasource...
Hi Team,I've few doubts related with CRM data upload to Audience Manager
using FTP Process. Please refer below table (.csv) for my CRM data
assumption Customer IDABC123 Yes 456YesYesNo789Yes No YesQuestion #1:
Consider my Customer ID 123 has only one CRM attribute (B=Yes) and
doesn't have other two attributes in system (A, C). What should be the
best practice for my csv file data Should I have an entry>> 123 "A"="",
"B"="Yes", "C"="" OR it should be just >> 123 "B"="Yes"Question #2: I've
an exis...
Thanks again Jantzen for quick reply. Could you please help in
clarifying little more doubts -So, for utilizing the data sources for
multiple environments: The recommendation is if the signals or input
data is common across the environment then we should use only one data
source. Kindly correct me if there is any understanding gap.Another
thing regarding troubleshooting, I was exploring the AAM
Dashboard>Analytics>Onboarding Status it is providing lot of useful
information about onboarded data. ...
Hi Experts,I am back with new questions on Audience Manager and sure
these will be answered very soon. Please see below questions -Multiple
Data Sources can be created in Audience Manger specific to in-bound and
out-bound data flows. Usually, these data sources tells about the origin
or the destination of the data. - Question: I want to isolate my data
sources for different environments (Dev, Stg, Prod), Can we create the
data sources specific to environments so that the dev, test or prod data
c...
Dear Experts,I have experience of uploading the Customer attributes
through "Profile and Audiences" using drag-drop and FTP features. The
FTP guidelines says the allowed file types are .csv, .fin, .gz, .zip.
Once it is uploaded and subscribed with Target and Analytics, the
uploaded data signals starts appearing in Target and Analytics across
the Marketing Cloud including Audience Manager.On the other hand, we
have similar file upload in "Audience Manager" using FTP process which
support .sync an...
Hi Parit,Thank you very much, I am able to trigger the event in DTM
based on the value change in custom variable at context hub. You are
right, I was making mistake while giving the custom schema during
context hub tool creation in DTM.But, there was a small issue and need
your input to fix that -I customized the OOTB schema means added my
custom section in existing JSON. I selected the "Customized ContextHub
Data layer" and entered this correct JSON schema in DTM. After
successful activation/ap...
Thanks Parit, I know you'll definitely provide some solution. Just
requesting, please go through the attached word document and
"store.session-store.js" that will provide more insight. Thanks in
advance!
ParitMittal wrote... Hi Deepak , Thanks for letting us know. As per our
understanding , You want to use AEM ContextHub tool that references and
uses a custom, non-ContextHub data layer within the Dynamic Tag
Management configuration. Please see the below link for information on
creating non-ContextHub data layer
https://marketing.adobe.com/resources/help/en_US/dtm/c_custom-data-layer-example.html
Thanks & Regards Parit Mittal Hi Parit, Please suggest, waiting for your
response on my below post. ...
Thanks Parit for sharing the link, it is very helpful. Though, I am
referencing the link but still facing some challenges while triggering
the dataelementchanged event on my custom data element. Please check the
attached word document to see the steps I am following. Please suggest
if I need to perform some step differently, it would be great help.
Thanks! "store.session-store.js" for reference -
ContextHub.console.log(ContextHub.Shared.timestamp(), '[loading]
contexthub.store.demo.01-session-st...
ParitMittal wrote... Hi Deepak , Ideally "_satellite not defined" is
encountered only when the Header Code doesn't get properly loaded on the
page or referenced at the incorrect location. Can you please share the
URL of your Website as well as DTM account details in a private message
so that we can debug the issue at our end. Thanks & Regards Parit Mittal
Thanks Parit!I am able to fix the "_satellite not defined" after setting
up DTM embed header and footer in my AEM DTM couldservice configurati...
Hello Experts, I am new to DTM world and following dtm.pdf for
implementing an event based rule which is triggered by the dataelement
value change of aem contexthub data element. The step by step example is
given in standard dtm.pdf at page# 52 onward.Issue:As per the
instructions, I've created a dataelement in DTM which is reading
cart.totalPriceFloat contexthub variable. Another eventbased rule is
monitoring the dataelementchanged action of this dataelement. All
propety, AEMcontexthub tool, da...
