It looks like Veracode does not like executing queries using the
ResourceResolver.findResource() method. ResourceResolver doesn't have a
parameterized version. Has anyone been able to resolve this issue? The
customer I am working fore requires that all Very High to Low risk
assessments are removed.
That is what I was afraid of. The client has a lot of sites and authors
are dumping large numbers of assets, many could be duplicates so the
search in the sidekick for assets takes a very long time to return
results. Limit would help where assets are found, but not in the case
where it takes a long time to complete. That is the biggest problem is
limiting queries that take very long to complete. The user might leave
the page but the queries run on, consuming CPU cycles that are no longer
I have a client that is on AEM 6.2 and I am being asked to set timeouts
on xpath searches. Looking at the documents for
javax.jcr.query.QueryManager, I don't see any way to do this.Is there a
way to watch a query's execution time and kill the thread after X number
Found it. There was a component in the header that had a data-sly-unwrap
attribute but didn't have anything to unwrap. It probably broke the
document structure. 6.1 must not have cared but it was a big deal in
6.3. i removed the attribute and the edits all work as expected.
A client of ours is porting their site from 6.1 to 6.3. There are some
components for which the edit frame and edit icon do not display when
clicking inside them in edit mode. I can get to the configuration from
the content tree in the sidebar but authors cannot access the
configuration from the touch UI like other components. It isn't specific
to any particular component s but they are components added to a page
component in the content.xml file and are simple added as follows:There
is a touch ...
I think I have it working now. In all of the documents it has you load
the dispatcher with:LoadModule dispatcher_module
/usr/local/libexec/mod_dispatcher.soThen configure it with:DispatcherConfig
3DispatcherDeclineRoot 0DispatcherUseProcessedURL 1DispatcherPassError
0I changed the to be
and it looks like the configuration was actually loaded.
I have the dispatcher running now but I am receiving the
following:[dispatcher:warn] [pid 62956] Dispatcher set as handler, but
not configured in server [10.45.9.173].Searching the web is coming up
with nothing so far.
I think I have everything set up according to the documentation but when
I start the httpd, I see this error from the dispatcher. There is a
dispatcher.any file set up and in the configuration folder.
[dispatcher:notice] [pid 60245] Server [10.45.9.173] has no dispatcher
0DispatcherDeclineRoot 0DispatcherUseProcessedURL 1DispatcherPassErr...
PuzanovsP wrote... Have seen this issue when downloaded wrong .so file
which was not compiled for my OS. For mac Mid 2015 you should use:
dispatcher-apache2.4-darwin-x86-64-4.2.2.tar.gzMac OSX (Darwin) x86
64bit Regards, Peter That is the one I'm using. I've also read all of
the documents on installing the dispatcher as well. I am on the latest
version of OSX(Seira). Maybe part of the problem is that they don't a
library for that version. Who knows. The httpd seems to start fine
without the disp...
Following the documents I've downloaded the Dispatcher but when trying
to run the Apache HTTP server, I am encountering the following error.
Any ideas of what I need to change to get the library to be recognized
and loaded? The version of the daemon is 2.4.23.Syntax error on line 172
of /private/etc/apache2/httpd.conf: Can't locate API module structure
`dispatcher-module' in file /usr/local/libexec/mod_dispatcher.so:
dlsym(0x7fec7b7000f0, dispatcher-module): symbol not found
The box with IoT for the title needs to be at the bottom of the other
boxes on the side. The parsys that contains the other three cards that I
want on tip is inherited from a parent page. The box with IoT is the
reference content. I'd like the side_parsys that contains the IoT box to
be after the inherited content.
I had a discovery item that I worked on. It was to add a reference item
to the side parsys. We already have a parsys on the side of the page
that contains one to many cards. My problem is that I don't see a way to
set where the added side_parsys item lands. By default, the added parsys
is at the top of the sidebar. Is there a way to specify that the added
side_parsys is inserted after the content inherited from the parent
smacdonald2008 wrote... You would need to write a custom service in that
case. Maybe something like:
Notice a custom servlet gathers assets and places them into a ZIP. You
can go a step further and place them into a package using Package
Manager API. Move the Package to the other instance (FTP ?) and then use
Package Manager API to upload the package. This could all be automated.
We have an application wh...
smacdonald2008 wrote... "What we are wondering is if there is a way for
us to create a service that could connect remotely to another instance's
JCR and use content from the remote JCR without having to write a
service on both sides." I would look at writing a custom service to
address this requirement. Out of the box - AEM does not have a mechanism
to do this. I also assume that you have ruled out packaging up the
assets to move the other other AEM instances as well. The problem with
kautuksahni wrote... roberth55706517 wrote... Obviously not. Are there
links to transcripts or recordings? Links for all the recording can be
found at :-
more reference links: Link:-
I hope this would help you. ~kautuk That sort of helps but not quite
what I was hoping f...
I have a workflow that doesn't seem to be progressing. It is a single
step Model with a process step. The activate() method is being called
when the bundle is refreshed but when the workflow is triggered, it says
it is running but never seems to enter the execute() method. In the logs
I see the following message:error.log:27.10.2016 11:15:29.844 *INFO*
[Workflow Starter Thread]
com.adobe.granite.workflow.core.launcher.WorkflowLauncherListener Is in
Has anyone directly connected on instance of the AEM to another remote
instance of AEM in order to obtain assets or documents from another
instance that is not part of a cluster of related instances?If so, how
bad was the performance hit?What are some pain points?
It could be that you don't have enough data for the query analyzer to
see a problem. Be careful assuming that when developing applications
that search data that your developer tests will hold in production.
Developers often test with so few records that problems with indexes and
queries aren't seen then in production they bring applications to a
stop. I've seen poorly constructed tables and queries take over a day to
run then apply an index, rearrange the query, and the query looking for
I'm also noticing that if you lazily load the fragments, that the JSON
model doesn't get updated with the content or the newly loaded panels.
If we are going to rely on the binding and the guideBride API for
managing pages, it seems this needs to be corrected.
AEM 6.2 Forms with latest patch.I have a form with two sub form
fragments where I have set the "Bind Reference" property on the
fragment's input fields. The problem I'm seeing is that the only items
that are being bound are the parent panels that do not have a Bind
Reference property. On another project(AEM 6.1), the input fields would
be added to the JSON model in the guide bride so that I could discover
the bind reference for the control's Id. What could I be doing wrong
that the JSON model is...
Watching the tutorials, they have created custom controls and add code
to the JSP page to load the clientlibs there. I thought the new forms
were supposed to load your custom libraries based on the clientLibRef
setting.I tried again where I created a folder, then created an adaptive
form and two form fragments. Also from this folder, I added a clientlibs
folder of type cq:ClientLibraryFolder and added a property categories of
String type. I set a value for the categories and added that to the
OK so what I have is a form that I've created. Then in the CQ, I have
node under the form, I have set the clientLibRef to this path. The
script is not loaded but I see a reference in the JSON string for the
page.The example shows the client lib added to a custom control then
adding the clientlib under that control and then adding the inclusion to
the JSP code for the control. So I am lead to assume that I also have to
What is the CQ name for this property? I have added the path to the
client library in the clientLibRef property on the guide container but
it doesn't load the script file. There is a reference to the path in the
JSON string but nothing gets loaded.
What I'd like to know is how to add custom clientlib script files to an
adaptive form. Do I have to override the page component or can I just
set the configuration to add the reference to the library when the page
So one of the concepts that makes object oriented design and programming
powerful is reusing components/objects. The idea is create it once, make
it solid, then reuse it over and over again.Where I'm at is that we have
a form fragment that defines an address. The binding and name are
defined in the fragment for the individual fields. The problem is that I
have a form that uses this fragment over and over for different address
types. The problem is that the binding and the name of the field is
roberth55706517 wrote... One item that might be of note is that we are
using fragments under the root page to define portions of the document.
Just a thought on this. Is the ID for the element calculated before the
fragment is embedded in the master form? In that case, the JSP may not
know the path that includes panels built into the master. Or, is the id
calculated after the document has been assembled from all of the