actually, I have this script in the date field. form1.headersubform.HEADERS.todaydate::ready:layout - (FormCalc, client) $.rawValue = Num2Date(Date(), "YYYY-MM-DD"). Should I add an if calculation to this? Also, what does "datum.toISOtring() mean?

Betreff: Need a date field to be locked upon first signature islandgirl23 - Adobe LiveCycle

Thank you radzmar, but I tried that. The problem is that if you reopen the form after it's signed, the date the date field that is locked changes to the current date. Example: It's signed on Jun 20, 2020. If you open the document on July 10, 2020, the date field changes to July 10, 2020. Can you help me with that.

Need a date field to be locked upon first signature islandgirl23 - Adobe LiveCycle

Hello, Please help me find a solution to this. I have a form that has a "current" date field. I would like for that date field to be locked when the first signature block is signed. I tried to use the action builder, but I could not figure it out. If you can provide a script, that would be appreciated.Thank you.

Simple but hard to figure out islandgirl23 - Adobe LiveCycle

Hello, I have a button on my form and I want it to operate like this:1. When you click the button, it asks you for a password.2. If the password is entered correctly, a date field box appears and it allows you to enter information in it.3. After the information is entered in the date field box, the button in #1 above, is hidden.4. If the password is entered incorrectly in #2 above, then nothing happens. Is there a script or scripts that can make this work?Your help in this is appreciated. Thank ...

password does not work islandgirl23 - Adobe LiveCycle

Hello,In my form, I have buttons which only I can operate by entering a password. The problem is that even though I have the password in the script, you can enter any word or letter or number into the password block and the button still operates. I think it's because I'm using JavaScript and Formcalc on the buttons, but not sure. Can you help? Below are the scripts of three buttons. The first two are the ones that do not work the way I want them to. The third one works fine. The "lock fields but...

Re: Hidden fields in drop down list islandgirl23 - Adobe LiveCycle

Thank you. That worked.

Re: Hidden fields in drop down list islandgirl23 - Adobe LiveCycle

I uploaded the form with the script for you to see what I'm hoping to accomplish if that would help. Please choose accessories from the 'type" block. You will see the table expand to include an "accessory type" block. Notice that the serial number block is still present. Now choose "Back packs" and you will see that the "serial number" block is hidden. Now if you choose another category from the accessory type block, the "serial number" block reappears. I need for this to happen for the other ca...

Re: Hidden fields in drop down list islandgirl23 - Adobe LiveCycle

Here is a screen shot. Thank you.

Hidden fields in drop down list islandgirl23 - Adobe LiveCycle

This is a followup question to my earlier post that was answered. I wasn't sure if I could add to it, so I created another post. Within my table, I have a couple of drop down names which DOES NOT require a serial number entry. So, I want the serial number block to be hidden if I chose those entries but be visible when I chose a category that requires a serial number. The top java script below works for one selection, so I entered that java script for each category separately thinking it would wo...

Re: Is this possible with Tables islandgirl23 - Adobe LiveCycle

That works. thanks

Re: need help with a message box islandgirl23 - Adobe LiveCycle

That worked! Thank you very much.

Re: need help with a message box islandgirl23 - Adobe LiveCycle

It's meant to clear all the values if I choose yes and not clear the values if I choose no. The red reset button in the top right corner works as it should. It's the button labeled "remove all entries from this specific record" that is not working right. When I click and answer no, it still removes the entries. Please choose Accessories and then a Accessory type and continue to fill in the form. Click the remove entries button. You will see that the"Type" and "Accessory Type" blocks erases when ...

Re: need help with a message box islandgirl23 - Adobe LiveCycle

Thank you.equipment to send.pdf - Google Drive

need help with a message box islandgirl23 - Adobe LiveCycle

Hello,I need a Warning message box to pop up when I click a button that will remove the entries from a table but instead of removing the entries after I click yes or no, it removes the whole table. I think it has something to do with the third entry, but I'm not sure. I can't figure it out. This is what I have in the click event:if(xfa.host.messageBox("Are you sure you want to erase all entries?", "Reset the form", 2,2) == 4){ xfa.host.messageBox("All entries have been removed"); xfa.resolveNode...

Re: Is this possible with Tables islandgirl23 - Adobe LiveCycle

Ok, I figured out a way to fix my issue but now I need to add a button which will reset the information within a specific table/record, not all tables/records recreated. I cannot locate any information or script that clears information within a specific record/table if you have multiple tables/records.

Is this possible with Tables islandgirl23 - Adobe LiveCycle

Hello,I have a table which consists of a drop down list. Depending on my choice, I need another drop down list to appear until it is chosen and then my choice from that list be entered into the table. At first, I created the other drop down lists within the table and then tried to hide them but I cannot figure out how to hide drop down lists. Is there way to accomplish this? I attached a snip of my table to help. The highlighted ones are the ones I want hidden unless it's chosen in the "Type" se...

Re: Reset to original document islandgirl23 - Adobe LiveCycle

That works!! Thank you so much for your patience and helping me.

Re: Reset to original document islandgirl23 - Adobe LiveCycle

form1.#pageSet[0].Page1.HEADER.ResetButton1::click - (JavaScript, client)xfa.resolveNode("form1.obtainedsubform.cardssubform.CARDS._Table1").setInstances(1);xfa.host.resetData();if(xfa.host.messageBox("Are you sure you want to erase all records and entries?", "Reset the form", 2,2) == 4){xfa.host.messageBox("All entries have been removed");}else{xfa.host.messageBox("No entries have been removed");}

Re: Reset to original document islandgirl23 - Adobe LiveCycle

I found a thread and entered this script, however, when I click no, it still resets the form.if(xfa.host.messageBox("Are you sure you want to erase all records and entries?", "Reset the form", 2,2) == 4){xfa.host.messageBox("All entries have been removed");}else{xfa.host.messageBox("No entries have been removed");}

Re: Reset to original document islandgirl23 - Adobe LiveCycle

Thank you very much. That worked! How can I embed a warning to popup?

Re: Reset to original document islandgirl23 - Adobe LiveCycle

Thank you to Magus069 and yourself. I looked at Magus069 and it may do the trick, but I will try all suggestions at this point. So, I added the .somExpression to the end of all except the two at the bottom - ".setInstance(1)" and "resetData()" and received "null". Had to click ok 4 times for it to go away. You will see this when you open the form and click on the reset button. In order to share the form, I had to make changes. It still functions the same. I only changed some of the names and the...

Re: Reset to original document islandgirl23 - Adobe LiveCycle

Ok. So this is what i have done so far. I tried the code without changing the names of my subforms. It didn't work. Then I changed my subform names, entered the names in the code without the # - it didn't work. Then I entered the last code - "app.alert.... and received this warning right off the bat. I clicked ok and this warning appeared again. I had to click ok 3 more times before it would go away.

Re: Reset to original document islandgirl23 - Adobe LiveCycle

when I rename my subforms, do I have to enter the # in front of the new names in the code? Also, so that I understand, if I try adding app.alert...., is this added to the xfa.resolve code...? How exactly would that look like? thank you for your patience.

Re: Reset to original document islandgirl23 - Adobe LiveCycle

the rest is below.

Re: Reset to original document islandgirl23 - Adobe LiveCycle

Ok. now the reset button does not work at all and the records are not removed. I'm doing something wrong. Here is what I placed under the click event. What did I do wrong? form1.#pageSet[0].Page1.HEADER.ResetButton1::click - (JavaScript, client)this.resolveNode('CARDS._Table1').setInstance(1);xfa.host.resetData();

Re: Reset to original document islandgirl23 - Adobe LiveCycle

Thank you. For some reason, I'm not getting this. Should this code be added to the click event of the reset button? or do I need to add another button? Also, do I need to add the "if" statement that is on the add button?

Re: Reset to original document islandgirl23 - Adobe LiveCycle

forgot to add the add buttonthis.resolveNode('CARDS._Table1').addInstance(1);if (xfa.host.version < 😎 {xfa.form.recalculate(1);}//-

Re: Reset to original document islandgirl23 - Adobe LiveCycle

This is the code under my "Reset Button".xfa.host.resetData();

Re: Reset to original document islandgirl23 - Adobe LiveCycle

so the exact code will be - object name.setInstance(1) under Click?

Guidelines

Cookie preferences