Adobe Marketo Engage

Hello everyone!I hope you are well and can help me in my research.   I should perform an operation with velocity scripts, however, my programming knowledge is really limited and I am struggling to understand how to do it.   Basically, from CRM via integration with Marketo, when I create events in the CRM, I carry around a whole set of information that then populates the event tokens on Marketo.   Now, I have to carry around links.   I can set these links on my CRM, but I cannot make them dynamic (I need to add a querystring with like ?aid={{lead.account}} at the end of each url, and this informations is setted in Marketo and not Dynamics. Since the links are themselves already contained in a token, I can't put a token inside a token because I've already tried it and it doesn't work. I tested:{{my.token}} with the token text as www.google.com/?aid={{lead.account}}. So I'm wondering: is it possible to set a VLC token that adds ?aid={{lead.account}} to every link in my

Hi all.  We have a database which includes family members who are using the same email address.A few questions:1. Can marketo cope with imported data for the same email address but with eg 3 different names?2. Can marketo send separate emails to each record, e.g. the 3 different people at the same email address?This doesn't impact us so much with newsletter comms, but for things like sending out unique discount codes it poses a problem as only one person is receiving their code.thanksSarah

Hello, I have recently run an AB test under 'Whole email' condition on Marketo with the Winner criteria being 'Clicks'. The winner has been declared as Email 1, however, the click rate for both the emails is 0 according to the AB test results dashboard.  I tried to open the Email Performance report and see that the number of clicks for Email 1 is 1. PFA the images below.   My doubt: Does the AB test declare the results based on the EPR? If no, how reliable is the AB test results dashboard?  

ウェブパーソナライズについて疑問が3点ございまして、こちらにて質問させていただきました。部分的でも結構です。もしお分かりになる方がいらっしゃったらご協力いただけますと非常に幸いです：   １）iphoneのSafariでの動作についてiphoneのSafariのブラウザでウェブパーソナライズが表示されません。仕様なのでしょうか。   ２）2回目以降の来訪者への表示についてウェブパーソナライズを設定したページを２回目に訪れた場合にはもう表示はされません。２回目以降に訪れた場合にも表示させることは可能でしょうか。可能な場合、Marketo上どのような操作になるかももしお分かりになったら共有いただけると幸いです。   ３）動画を自動再生する方法について３－１）ウェブパーソナライズの中に動画を載せる場合、その動画を【自動】再生することは可能なものでしょうか。可能な場合、Marketo上どのような操作で載せられますか。我々は現在はYoutubeをEmbedした形にしていますが、それですと自動再生はされず、再生にはクリックを必要とします。３－２）また、設定する動画が【無音声】の場合であれば、例えば、音楽を聴いていた人がこの動画に遭遇して自動再生が始まった場合にも、聴いていた音楽から切り替わってしまうことがないようになりますか。   沢山の質問で大変恐縮ですが、もしお分かりになる方がいらっしゃいましたらお知恵をお借りできますと幸いです。

There’s a post in my drafts explaining that you don’t need any custom lightbox code in modern browsers — neither MktoForms2.lightbox() nor a 3ʳᵈ-party library.   In the meantime, though, duty calls. A Nation user had already decided to use the Lity lightbox library but couldn’t figure out why their form — or more precisely, the form’s children — rendered twice inside the lightbox:   Below is the code they were using. Can you spot the error?<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script> <script src="https://offers.example.com/rs/123-NBB-456/images/lity2.js"></script> <link rel="stylesheet" href="https://offers.example.com/rs/123-NBB-456/images/lity.css"> <div id="inline" style="overflow:auto;padding:20px;width:600px" class="lity-hide"> <script src="//offers.example.com/js/forms2/js/forms2.min.js"></script> <form id="mktoForm_5050"><

Hey Community,I received a request to update our company CNAME. I have added the new Domain alias, but now need to update the actual domain listed in the Admin section. What will happen to existing landing pages when I make this change? Will all the current landing pages update to the new domain? I would assume they would remain unchanged but that new landing pages built would have the new domain. Also, what would happen if I clone a program with landing pages that have the old domain? Will the cloned program use the new domain or whatever domain was used when the original pages were built?Any help here would be great!Thanks!Keith Nyberg

Hello comunity is there any way to auto fill my marketo form from URL parameters like first name, last name, email etc? 

Hello,  We use Marketo's Munchkin Tracking and have a customer that has requested that we don't store any cookies for longer than 6 months.  Is it possible to adjust the lifespan of the Munchkin Tracking Script from 2 years to 6 months, or even apply settings to specific IPs or sets of users? We have never had a customer request this before so unsure how to handle it.

Hello comunity! is there any way to show popup ( thank you + button ) that i build in elementor pro after form submit?Thanks! 

Hello, is it possible to track leads' engagement with email sends over time segmented by source? We are looking to examine our acquisition avenues and compare engagement rates at sign up compared to X months after acquisition. I've used email performance reports to look at overall engagement by source but this doesn't help with analysing which leads are more likely to still be engaging after some time (e.g. 3 months after sign up) and identifying any drop off points or trends. Thanks!

Hi Community People,   I have a query on TAM's weekly report. I have a weekly report setup sorted on the basis of the Engagement score and it is sending the report email as expected, however, it is not sharing the complete data, It is only sharing very limited accounts with limited stats.    I want the report to share all the accounts along with their engagement scores and the number of people in that account. Can I achieve this? If yes how?   TIA

Hello folks,   Is there a way to get to know how many leads are not in Marketo, but only available in CRM (Microsoft Dynamics 365) ? Please help. Thanks in advance.  

Hi Team,   I am working on task to remove records which are no longer needed in database (Marketo)   These are the criteria's identified to delete no longer needed records.Anthing missing please assist:1. Invalid email address2. Has been hard bounced before 3. Duplicate   Thanks, Deepthi.  

I found this article: nation.marketo.com/t5/knowledgebase/unable-to-abort-a-triggered-campaign-in-progress/ta-p/253483   It is helpful, but my question is why a deactivated trigger campaign continues to send customers through the flow? I tried to remove campaign members from the flow, but with the campaign being deactivated, it won't allow me to select the campaign. What do I need to do to make sure no more emails are sent from this campaign?   Thank you!

Hello,   I'm baffled as to where the problem is within this email template.  It was working except on OL Office 365 Windows 10 so I tried to replace the button code because they don't render. All other clients look fine. Now I get invalid module #template-wrapper > center.   I've checked every center in the. I flattened the formatting and then let VS Code format to see if I am missing a tag. I can't find it. Any suggestions would be greatly appreciated. And if there is a better tool to check syntax, I would greatly appreciate a recommendation.   I'm including a link to the html file   Thank you, Dennis

Issue Scenario: In case there are multiple Marketo instance, you are unable to login via new invite sent to your account. Upon clicking the URL you are prompt to enter password but error message prompts as password mismatched   Note: This Issue occurs only if you are trying to use same email id to login to multiple instance   Solution: 1. Try to open the invited URL in a new browser post history & cache clean up  2. Use exactly same password like your primary instance. 3. Use forgot password option to reset password and authorize new device   Incase you still get similar issue again, 4. Delete / remove user from the primary account. 5. Use Marketo forgot password option to verify the email is not associated with any account / instance 6. Ask your admin to send a new invite from new instance 7. follow step 1 8. Use a brand new password 9. Once you log in to new instance, ask you admin to send account invite for other active instances too. 10. Use the password cre

I am inserting a cookie pop-up and cookie preference tracker on my Marketo landing pages to mirror our corporate site. The cookie provider we use (Cookiebot) charges by domain and number of sub-pages.   Our images and files use the same CNAME as our landing pages. Does anyone know if these assets hosted on Marketo would count as landing pages when Cookiebot scans the domain?

I am working with an ABM agency who is using a subdomain of ours to run campaigns off of unbounce landing pages.   We gave them the munchkin code and form embed code, but the policy tokens are not loading the policy text.     Landing page: insurers.sovos.com/sovos-test-page/.     

Hello Everyone! today i need to do this, and I hope you than help me think it clearly. I have a long database... what I wanna do is that if the user in my database, has a special field completed with data. I show one snippet. But if that special field is empty, to show another snippet. Is it possible? Another thing is that every snippet has dynamic info from the same database.    Can I do this with marketo?    Thanks!

We're looking for a unique ID that could be generated and captured at the time of a Marketo form submission. That unique ID would be passed to Facebook via the Facebook conversion script pixel that fires when the form is submitted. The unique identifier cannot contain personally identifiable information (PII). We are integrating CAPI through Zapier.   Does anyone know how we can go about achieving this? Edit: We are open to any server-side solutions as well. 

This engagement program is built with multiple streams and one content piece per stream.  The transition is based on whenever the email in the prior stream is delivered.     Here’s how things are working right now. A recurring batch smart campaign adds people to this engagement program in 01 01 sends email whenever the cast is due - which is every two weeks People qualify for 02 when the email in 01 delivers (transition rules)   But we need to change this to the following. People who qualify till the time of cast for 01, need to get the email within the week. Currently, if the cast of 01 is not due this week, people who qualify this week will get the email in 01 next week. People who qualify for 02, need to have a delay of at least one week, but maximum of two weeks. That is, the email in 02 should be sent within two weeks and at least one week after email in 01 has been delivered.   I’m thinking to    Change the cadence of 01 to weekly Change t

I have a multi-page pdf which I am linking to from my marketo email. The pdf is stored in marketo. I have added #page=2 following .pdf of the url in the html code for the link. This works great on laptops but not on mobile devices. On both an iPhone or a Samsung, instead of landing on page 2 of the pdf (as I do on a laptop) I land on page 1 -- as if #page=2 was not in the link. Does anyone know a way to make this work on mobile devices?