Adobe Developer

I was recently working with a consultant and provided a solution to calculate the 'Expected percentage complete" which is being requested by our PMs. We had this in a previous tool and I need to replicate in Workfront. The recommendation is below, however I need guidance on how to go about doing this: [Consultant block]: You can create a workaround to calculate and report on this by comparing the task's planned progress to its actual progress. This can be done through calculated fields in reports. Here's how you can approximate the **"Expected Percentage Complete"**:Calculate Expected Percentage Complete:This can be done by dividing the number of days that have passed in the task’s timeline by the total duration of the task.Formula: `(Current Date - Planned Start Date) / (Planned Completion Date - Planned Start Date) * 100`This will give you a percentage of how far along the task *should* be based on the planned timeline.Compare Actual Progress:You can then compare this expec

Hi,I created a runtime web-action that ll fetch events from journal api like thisconst journalObservable = await client.getEventsObservableFromJournal(baseURL, journalOptions); journalObservable.subscribe( x => logger.log('onNext: ' + JSON.stringify(x)), // any action onNext event e => logger.error('onError: ' + e.message), // any action onError () => logger.log('onCompleted')) //action onCompleteI am able to invoke the web action from postman. And when I publish events into the journal api, my logs read the events from journal successfully.  Now the web action stays alive like 1-2 mins. Then dies. So if event is published say after 5 mins, those events are not received. Is this expected?  Alternate I could think is, create as non-web-action using alarm. And cron trigger the action every say 5 mins. Is this correct that "Reading journal events must be created as non-web-action using alarm cron?"  

I have this link https://example.com/Full+Page&JC=Landing+Page+Submit+Prebooking in the button component but When clicked, spaces are encoded as %20:L=Full%20Page&JC=Landing%20Page%20Submit%20Prebooking.Can you help me with this?, I have the model and implementation but It doesn't work 

I'm trying to generate a clientlib for an Angular SPA in AEM using aem-clientlib-generator. By default, the baseHref (or deployUrl) for the resources folder in the clientlib is /etc.clientlibs/<proj-name>/clientlibs/clientlib-angular/resources.This works fine in the local AEM environment (http://localhost:4502/). However, in other environments, we have paths like /auth or /pub after the host URL, e.g., https://aem-dev-url/auth or https://aem-dev-url/pub.In these cases, the resources URL should become: https://aem-dev-url/auth/etc.clientlibs/<proj-name>/clientlibs/clientlib-angular/resources, depending on whether it's the auth or pub instance. How can I achieve this?I tried configuring APP_BASE_HREF dynamically based on the URL in app.module.ts, setting it to /auth or /pub, but this doesn't work for accessing the resources folder in the generated clientlib.How can I provide a dynamic base URL when generating the clientlib? Are there ot

Hello Team, I am getting securty update message poup when opening or admin panel I am not getting which module should install to fix this issue please check attached screen shot and let me know me know security patch links which I could download and apply ptach.

Hello, As the subject says I am looking for someone to help me with the development of a photoshop extension.I have the UI finished already and will provide files for all buttons in all of their various states. In addition i also have all of the scripts finished that the extension will use.I need someone that understands extension development to write the html for the UI and link to the UI buttons to therir respective functionality and also do the certification, if extensions still use the sign command like I remember. Thanks in advance.

We are planning to migrate from AMS to AEM Cloud, and our project currently uses inRiver. We've heard that the inRiver connector is not available for AEM Cloud. Could you please let me know if anyone is using inRiver with AEM Cloud?Thanks

We are planning to migrate from AMS to AEM Cloud, and our project currently uses inRiver. We've heard that the inRiver connector is not available for AEM Cloud. Could you please let me know if anyone is using inRiver with AEM Cloud?Thanks

Hey Adobe, I am trying to figure out what my quota is to use the photoshop API. Any assistance here would be appreciated! I cannot find a solution to it. I have attached a screenshot of what I see in my account when I go to my quota usage. 

We're migrating to the OAuth Server-to-Server credentials.  Completed step one of retrieving the client secret and can successfully generate access tokens.  However, when replacing the API authorization bearer token with the new OAUTH token, we receive an UNAUTHORIZED response.

I have a requirement to add a new customer to third-party rest-API.It contains an authorization header and request parameter. How can I mutate a customer to the third-party rest API via the API-MESH?Can anyone let me know how I can achieve this?I am not getting anything like how I can mutate and configure mesh.json,

request you to please provide the details if adobe Marketo connector provides syncing of activity records to crm? Marketo documentation not mention activity synchronization with Microsoft Dynamics 365 CRM. In case of sales force it's mention.   

Hello,I've created an interactive form in adobe AEM form designer. The form is dynamic,the page numbers and specific location of subforms will change as the content changes. I am trying to add a static button at the top of the form to help the user navigate to most common headers. The form is sometimes 16 pages long and users get frustrated by the constant scrolling.Designer has a custom page navigation object which is a good start. I have that in the right spot, I'm just looking for the right script to tell it to navigate to whatever page contains the section header. The buttons are on the Master Page, but I'm wanting it to navigate to the subform on the Main Page.  Here is what I have which is not working right now:xfa.host.currentPage = form1.Main1.SFInterimCorrectionActions.TXTInterimActionsCorrections.thisPage.rawValue - 1 ; The default they provide for the Page Navigation to go to a specific page works correctly, but my issue is that the page I want will not a

My use case follows an idea I posted https://experienceleaguecommunities.adobe.com/t5/adobe-experience-manager-ideas/enhance-assetcompute-microservice-to-accept-alttext/idi-p/705880 Basically I am receiving asset creation events from Workfront and am creating assets into AEM using a runtime action. I am able to create successfully using AssetCompute microservice. But after asset creation, I need to update altText and couple custom properties. These values are available with event at Runtime action. Now AssetCompute microservice DOES NOT allow to update metadata. The runtime action dies once it fires createAsset, doesnt wait ( or doesnt know) for asset to complete processing.   So I temporarily need to cache altText metadata somewer; wait for microservice to complete upload process, and then update metadata. One workaround is to use JCR as temp storage. store the metadata properties onto /var somewer and then fetch them after asset processed. Looking for better

Hi,I want to test the Photoshop and Firefly Services APIs. When I try to add them to my project, I get this message: 'Permission required. Your admin must grant you permission before you can create a project.' How can I get access to them?Thanks,

Hi team, I am trying to integrate Analytics Health Dashbaord. For that I am following the process as given below but not able to generate tokens:https://express.adobe.com/page/tnNQGNlfzta3b/ To use the Analytics Health Dashboard v3.0+, you need 1) an Experience Cloud login with System Admin OR Developer access, and 2) Adobe I/O OAuth credentials established to connect to the 2.0 Analytics API. Read more about the 2.0 API, and watch this video on how to establish OAuth credentials.In cases where your browser does not return JWT token when you attempt to authenticate, there is an option to manually generate a JWT Token and use it to run the Analytics Health Dashboard. The steps to do so are as follows:Obtain the Client ID and Client Secret from console.adobe.io for the project that was setup for your AHD integration.Navigate to the Adobe OAuth 2.0 PlaygroundEnter your Client ID and Client Secret. Fo

I wish to launch paid extension in magento marketplace, what are the major changes needs to be done in the magento marketplace, Already i have upload 5 free extension on magento marketplace. So now I wish to launch paid one but for this we have to submit or contact afor tax and payment to marketplace team. Please let me know

In AEM cloud when we edit any image like crop and rotate and then save it, the image is not getting updated. After analyzing I could see there is one node "dam:failedRenditions" getting created inside "jcr:content" of the image. How can we fix this ?@arunpatidar can you please help on this.

Hi All, I am trying to create a webhook for my Adobe IO Project using Openwhisk. I created a new webhook action and able to see it in wsk action list. And I am able to fetch the URL too. But when i configured it in my adobe io project's event registration I am getting "Webhook has been disabled because either webhook is unreachable or verification has failed". When I checked the activation list in openwhisk. I got the below error  {"error": "Cannot initialize the action more than once."} After got this error. I deleted the action and tried creating it from scratch, after that also I am facing the same issue. Can someone help me on this ? Cheers 🙂 

I have a requirement to configure the restapi with an API mesh, as we hit the rest api through Postman, populating the required parameter and headers provides the JSON schema result.restapi- https://sandbox-api.ornament.health/public/file-api/v1.0/filesetparameter- pid (Ex: 1018fee1-d1...........................)header-Authorization: Bearer eyJhbGciOiJBMjU2S1ciLCJlbmMi..................... API mesh gives us a graphql endpoint and if I add this source(restapi) to API mesh then how will I fetch the same response from that graphql endpoint?We need some query to fetch the data, what is the process and how can I achieve this?https://developer.adobe.com/graphql-mesh-gateway/mesh/advanced/extend/resolvers/following this document. 

Hi Community,i am trying to customize the predicate in Assets admin search rail to get multi-select dropdown and location predicate to get suggestion list when i enter a word to text field area to select option and filter assets but i am unable to filter the assets based on my customization is there any possible ways to customize the predicates and filter assets.

When we subscribe to event journal using getEventsObservableFromJournal, does the subscriber WAIT for each event callback to complete before switching to next event? Say if 500 events are queued into the journal, and I invoke getEventsObservableFromJournal.Do ALL events get consumed parallel and 500 threads are spawned to process each event asynchronously?OR will the observable, consume events synchronously? Once an event is subscribed, the observable WAITs for callback function to complete fully before moving to next event. Are the events consumed synchronously or asynchronously? 

I am trying to Use Adobe Analytics API in Postman  I am getting the pop up url to login into Adobe and after login it doesn't redirect. I am assuming something missing in the URI and Redirect URI pattern 

The administrator of my company has enabled me the corresponding permissions according to the documentation But Im not getting events showed in youtube demo These are my events   And these ones are from youtube demo   Link: https://www.youtube.com/watch?v=1oYpur9JSNI I noticed there are a few of them but I do not know why I can not access to that "common" events because We have adobe commerce running  as prod and I think those events should be activated for me Instead of that, I have some "events" in api section  And it only shows this   I want to try it as the youtube demo Help me please, thanks.   

This is regarding a newer module from Adobe: a D365 connector from AC: https://commercemarketplace.adobe.com/ae-adobe-msft-d365-fo-for-adobe-commerce.html. We have set this up through app builder in our staging instance connected to our D365 sandbox. We are having an issue seeing orders come through onto D365. Since this product is fairly new, does anyone know what we could be missing? We set up I/O events, I/O management, Adobe I/O events, Commerce Product Synchronization, Commerce Customer Synchronization, Commerce Order Synchronization, Backoffice Customer Synchronization events in app builder.