We have a 3rd party security scanner tool that crawls our site. They are
filtered out of our data set using our bot rules. However, we are still
billed for all of the server calls even though the traffic is flagged as
a bot. Is there anyway to turn off the image request so we will not be
billed for the server calls it generates?
You could check...Your eVar setting maybe set to 1st touch, or something
in your cart funnel is triggering another product referral to overwrite
the order. You could confirm by...Looking at participation or linear
order metrics. The number of orders attributed to external natural
referrals maybe equal to total orders/revenue for the time period you're
looking at.
Your Carts is probably set to the scOpen event and maybe configured to
fire only when a new cart is created. Carts wouldn't include customers
that open a new cart in visit A then return on Visit B and add items to
the existing cart then order. Cart Additions maybe a better/closer to
orders.
arob87 wrote... Hi there, If you use $1, $2 etc in the "to" section,
where $A1 is your first extracted value as per screenshot below this
should work for you Thanks dude! Will give this a shot.
We are capturing this value in a eVar:
{wt-graphic}{pt-t-shirts}{al-ASpot}{ct-backtoschool}{aid-23894765}*We
wanted to use Rule Builder to extract the different values within the
braces ( {} ) and put them in a classification. *We have written the
Regex that can isolate the values. Our problem is that I cannot see a
way to take the identified string and assign it as a classification
value. Is it possible to populate the "to" section with what the regex
is populating?
When I do a break down my screen resolution of 1366 x 768 by Browser
Width - Bucketed I am seeing 2-3% of my traffic fall into the 1500 to
1599 bucket. Any clue how this possible? Looking at Device Type of Other
only (assumed to be desktop).
mattlukoff wrote... Hello, How would I code a form field in order to
pass data back into site catalyst. Would those be as Evars/sProps or is
there a better way? Thanks, Just a heads up, if you're passing any PII
you may want to double check with your legal team and make sure your
privacy policy is updated. I had the headache with dealing with my
internal legal team when setting this up a few years ago.
Gigazelle wrote... The fallout report's path must be exactly followed
without any pages in between. This is most likely what you're seeing the
differences in the other reports. I am not sure if this is a accurate
statement. When viewing a fallout report you can see next steps before
the specific item (in ad-hoc). This documentation also mentions that
"eventually" saw the specific item:
http://microsite.omniture.com/t2/help/en_US/reference/reports_fallout.htmlI
think this statement would be true ...
We had the same issue and identified a bug if you trying to run as an
pdf. It worked for us when you change the report format over to Excel.
If pdf format is a must have, you can also create a reportlet and
dashboard, the bug is only scheduling reports and bookmarks, dashboards
work fine. Our ticket is still open for this issue, and it is "with
engineering" to fix.
I accidentally created a marketing channel rule I want to remove. Is
there any way to remove it? Just got off the phone with client care and
they said there was no way to delete it and my only option would be to
clear out the rules in the config. and move to the bottom of the process
rules list.
The only way to do clean would be to pull in time-stamp and take the
time-stamp of page A and subtract from the time-stamp page B. No awesome
way to do in the UI. Possibly you could setup a implement at eVar/Prop
to capture the time stamp (might get messy). Also you could pull from
the raw data if you have a feed setup and could do through sql or
tableau.
Kerri Adcock wrote... Hello - I'd like put the country value (Adobe
Dimensions > Visitor Profile > Geosegmentation > Countries) in a prop
and/or eVar so I can classify it into our custom geographic hierarchy.
I've tried doing this via processing rule, but Country is not available.
Is this something easy I can hand off to our DTM expert? At first
glance, it doesn't look easy to do there either. I've explored the
option of using segments and the new Analysis Workspace, but our end
users don't have...
Both show up, but the only a few of the canned traffic metrics show up
(page views was not one of the metrics that did not show up). All of our
events show up in the metrics for real time.
We had the same issue, but it looks to be corrected in there last
release on 6/19. We had to download a new java file and launch Ad-Hoc
from the web interface.
No problem, I have been researching a lot lately trying to understand
how visits are credited. Maybe you guys can help or offer advice on my
question! How can you get an accurate visit count for the channels that
are sandwiched between the 1st and last touch? Visit 1 = OrganicVisit 2
= PPCVisit 3 = Email When I pull my channels report, would the PPC show
zero visits since it was overrode by the Email channel, or would it show
one visit? Other metrics (orders, revenue, etc.) have a work around wi...
We currently have them checked to override except for direct and abandon
session refresh. If you have this same setting, direct is a % of traffic
to the channel. (i.e. when breaking down paid search, one of the
referrers will be direct (typed/bookmarked). Good to know when doing
analysis on your direct channel, b/c it shorting the actual traffic from
the channel and attributing to last touch channel that is set to
override. This link my also clarify the usability of the feature:
http://blogs.ado...
warrensander wrote... We are also having Ad-Hoc issues but only with
some PC's my system works fine and I have the EXACT same settings as
other users. I have an HP laptop and they have Lenovo's. I'm guessing
there is something strange with a Lenovo driver. We've had some of our
Java experts try to take a look at this but their systems all can run
Ad-Hoc and we will have to have one of those with a system that won't
work give theirs up to IT for a couple of days so they can figure out
the errors ...
Hey TM below are the details. I tried your suggestion and had no luck.
The last update I have is from the escalations team and that it was with
engineering. Incident ID: 150619-000207Java Version: V8 Update 45OS:
Windows
Ever since the release Ad-Hoc analysis has not worked. I have
re-installed Java to ensure I am on the latest version and have launched
from the web UI. When you try to run anything it does nothing. It will
also not let you close the tool, you have to close via the task manager.
Anyone else having the same issue? I have a ticket open, thinking this
route would be faster if someone else had the same issue.
I read the documentation and I couldn't find any clarification on this.
Could you point me in the right direction for where you were able to
find it in the documentation?
Now that calculated metrics are "share-able" If I have segment built
into a calculated metric and share with co-worker A. However, co-worker
A does not have the segment shared with them. Does the calculated metric
still work for co-worker A?
Hey Brian we are running into a similar issue. We are pulling page views
by hour for a day and it isn't populating data for the hour field for a
some pages. It is also populating data in advance of the current time
(i.e. it is 5pm now and it is showing visits for 11pm). Was curious if
you ever found any solutions to your issue. Thanks!
The experience on our site is if you add a product to your cart it takes
you directly to the cart page. The scAdd event fires on the cart page in
the global events area. The only s.products we are capturing on the cart
page is the one that is added to cart (currently). We are looking to
change where all of the items on the cart page will populate the
s.products and configure our scView event. With our current experience
where you go directly to cart after adding to cart, the scAdd event
would fi...
Your week zero is probably the first few days at the beginning of the
year and is considered week 52 in the prior year. Week 1 in 2015 starts
on 1/4/2015, week zero is probably 1/1 thru 1/3. Is the data for week
zero look to be partial or 3/7ths of a normal week?
larry he wrote... Thank you, Eric. You are right. As you said, the
"classification rule builder" can work it out. What does "it goes back 6
months" means? The rule will classify your existing data for the prior 6
six months prior to your creation date and any new data going forward.
Anything prior to 6 months you would have to do a manual classification
via the browser or FTP upload.
