Brian_Kent_Watson

Re: Adobe Analytics "403025: Profile Not Valid Issue" while hitting Get Project API - Adobe Analytics

Can you verify that the user you authenticated is a member of a valid Analytics Product Profile?

Re: Access Processing Rules via API - Adobe Analytics

@jkm-disco We appear to be using the term "support" and "available" slightly differently. API access for processing rules is not officially supported in any version of the Analytics APIs (1.3/1.4/2.0). The version of GetProcessingRules that some have used in the past is an internal Adobe API that was unintentionally exposed a few years back but never officially documented or released, thus it's not supported nor officially available. The undocumented and internal GetProcessingRules endpoint is s...

934

Re: Access Processing Rules via API - Adobe Analytics

@jkm-disco Which part of my answer is incorrect?

977

Re: Access Processing Rules via API - Adobe Analytics

To answer @anmassey's question, there is no announced timeline for end-of-life with API 1.4. RSiteCatalyst is not provided or supported by Adobe but is an open-source project supported by a community of users.

1.1K

Re: Maximum options in a workspace dropdown - Adobe Analytics

Saumya's suggestion will work if you want to go that route. From a product perspective, we are unlikely to add support for more than 200 items in a dropdown filter as scrolling through 200+ items in a drop list is not a great experience for most users.

263

Re: API 1.4: Cohort reports - Adobe Analytics

Cohort reports are only available in the Analysis Workspace UI but there is not a specific "cohort report API" method that Analysis Workspace calls. Instead, Analysis Workspace uses a combination of fancy segments and multiple data requests to construct the cohort panel. You can produce a cohort panel by using API 2.0 and constructing the segments and data requests for the inclusion and return similar to how Analysis Workspace does it. I recommend you use the Workspace debugger to analyze the AP...

Re: Access Processing Rules via API - Adobe Analytics

API support for Processing Rules is not available in API 1.4 or 2.0 at this time, including read-only API methods. Processing Rule changes are currently restricted to the user interface. There is no announced timeline for when this functionality will be available by API.

1.2K

Re: Analytics 1.4 API - Rules - Adobe Analytics

Processing Rules API is not available in 1.4 or 2.0 at this time, including read -only API methods. Processing Rule changes are currently restricted to the user interface. There is no announced timeline for when this functionality will be available by API.

217

Re: Restrict user read permissions for API 2.0 - Adobe Analytics

That's a possibility. We'll need to consider how such a change would impact functionality in the UI such as sharing and schedule recipients, etc. Because Analysis Workspace is built on the 2.0 API set we generally want to keep behaviors in the API consistent with behaviors in the UI. i appreciate the feedback in this thread.

8.2K

Re: Restrict user read permissions for API 2.0 - Adobe Analytics

Note that non-admin users can see all users in the company, including First Name, Last name, and Email address, when they take actions in the UI such as sharing segments and Workspace projects, adding recipients to alerts and scheduled reports, etc.The three elements of admin status, title, and phone haven't been previously exposed in the UI so that is additional information that was added for API 2.0. We can consider making a change such that only admins can pull the lists of users via API but ...

8.2K

Re: Adobe Analytics 2.0 API - Adobe Analytics

The 1.4 Data Warehouse API will be deprecated only when equivalent functionality is supported in a newer API version. Adobe has not announced any timeline for Data Warehouse functionality to be available in a newer API version yet so the 1.4 Data Warehouse API continues to be fully supported.For information on Data Feeds I recommend this help document as a starting place: Analytics Data Feed

4.3K

Re: Remove individuals from "Share Projects" / "Shared With" list for Workspaces - Adobe Analytics

You need to remove the users from all Analytics Product Profiles inside of Adobe Admin Console. The list of users displayed in the Share Projects UI comes from Admin Console. Any users with an Analytics Product Profile (aka, a permission group configured for that login company) will show up in the list.

1.0K

Re: Web API 2.0 request limits - Adobe Analytics

The solution is just what the error message says: reduce the rate of requests.In rare cases Analytics has increased the throttle limit for some customers when they have submitted a request through their Account Manager or Customer Success Manager and described their use case and explained why they need to make API calls at an increased rate. Most of the time the requests are denied because when the customer explains the use case it uncovers a misunderstanding of how the API works or what they're...

2.7K

Re: Adobe Analytics 2.0 API integrate with ReactJS webapp - Adobe Analytics

You can definitely use the 2.0 APIs to build a ReactJS/JavaScript app. Workspace itself is built on the 2.0 APIs and uses React and JavaScript.The APIs themselves are documented here: GitHub - AdobeDocs/analytics-2.0-apis: Documentation for the Adobe Analytics 2.0 APIs There was also an introductory lab on them at Summit, which you can find here: Adobe Summit 2019 | L751 - Explore the New Adob... | Adobe Community But there is no specific tutorial or documentation regarding usage of the APIs in ...

2.1K

Re: Clicks on page - Adobe Analytics

Hi alanoudfahad, You mention "ClickMap" but ActivityMap is the latest version of the tool. Can you verify if you were using ClickMap or ActivityMap?Ultimately, Workspace and ActivityMap report on the same underlying data so it largely depends on what data you're sending to Analytics. For example, if you send in specific click or link-tracking hits to Analytics then Workspace and ActivityMap can report on them.

1.5K

Re: How can I refresh OAuth 2.0 token before It expire - Adobe Analytics

See my comment above.

2.6K

Re: Daily return visits report in Adobe workspace? - Adobe Analytics

The Return Visits report in Reports and Analytics is not supported in Analysis Workspace. Although I don't speak for the official product roadmap, I believe it's unlikely to be supported in Workspace in the future. The Return Visits report in Reports & Analytics is based on a different reporting engine than Analysis Workspace so it's unlikely that you'll be able to simulate a daily return visits report in Workspace that exactly matches what you see in Reports and Analytics.

1.3K

Re: Web API 2.0 request limits - Adobe Analytics

For the Analytics 2.0 APIs, the throttle limit is set at 120 calls per minute, per user, regardless of report suite or company. When the throttle limit is crossed, the server returns an HTTP 429 status to the user the with message content: "too many requests". Note that the throttle applies at the API gateway layer. The throttle limits can't currently be raised.There is also a throttle applied by the underlying reporting engine per report suite which is independent of any reporting client (e.g. ...

2.7K

Re: Add a project to a report suite - Adobe Analytics

Sending a Workspace project in PDF format on a scheduled basis is a common approach. You can also Share the project with other Adobe Analytics users in your company so they can access it directly in the Workspace UI.

907

Re: Adobe Analytics api - Adobe Analytics

You don't need an Analysis Workspace project in order to query data using the Analytics API. The Analytics API allows you to query any data the API caller (either an authenticated user via oAuth or a service token via JWT) has permissions to view, regardless of whether that data is displayed in a Workspace project.If you want to query the same data that is displayed in a Workspace project, you can use the Workspace debugger to see how Workspace formulates the API requests. Using the Workspace de...

551

Re: Let me copy dimension values only in Analysis Workspace tables - Adobe Analytics

I was able to select just dimension values by clicking the dimension column header then shift-clicking in the dimension list. It selected only the column of dimension values and I could copy it to clipboard. For example:Is that what you're looking for?

2.7K

Re: Make shared metrics unvisible if not specified in product profile or Virtual report suite - Adobe Analytics

Thanks for the suggestion Patrick. The short-term solution for your use case would be to unshare the CMs from all users and instead share them with only the subset of users that you want to see them.

882

Re: Add a project to a report suite - Adobe Analytics

oodaddy2 Can you clarify your question a bit or provide a screenshot of what you mean? Are you thinking about a Virtual Report Suite? In other words, curating a Workspace project as part of a VRS? Are you thinking about having a Workspace project show up in the metrics/dimensions menu in Reports & Analytics?A report suite is essentially a bucket of data. A Workspace project is essentially a way of visualizing and reporting on the data in the report suite bucket. A single Workspace project can b...

909

Re: Adobe Analytics 2.0 API - Adobe Analytics

ishans9314858 is correct about the API quota limit of 20K calls per hour per Analytics company; however, that is for the 1.3/1.4 Analytics APIs. For the Analytics 2.0 APIs, the throttle limit is set at 120 calls per minute, per user, regardless of report suite or company. When the throttle limit is crossed, the server returns an HTTP 429 status to the user the with message content: "too many requests". Note that the throttle applies at the API gateway layer.There is also a throttle applied by th...

4.1K

Re: How can I refresh OAuth 2.0 token before It expire - Adobe Analytics

The documentation for JWT is available on the main Analytics API documentation site: analytics-2.0-apis/jwt.md at master · AdobeDocs/analytics-2.0-apis · GitHub https://github.com/AdobeDocs/analytics-2.0-apis/blob/master/jwt.md

2.5K

Re: GET Shared Segments from Analytics API 2.0 - Adobe Analytics

You can use the handy technique of "see how Workspace does it" to see how to format the segment GET request. As an example, I turned on Developer Tools in my browser, then created a new Workspace project, and I can see the call to the segment service go across the wire like so:Request URL: https://appservice5-10.omniture.com/analytics/1.0/segments/?locale=en_US&includeType=shared,templates,curatedItem&dataType=oberon&curatedRsid=geo1metrixxgeometrixx.outdoors&expansion=favorite,approved,tags,usa...

1.2K

Re: How can I refresh OAuth 2.0 token before It expire - Adobe Analytics

Refresh token flow is not supported by Adobe Analytics V2 APIs under Adobe IO.In the context of Adobe Analytics, Adobe IO's oAuth authentication should be used by applications that authenticate a human user for the duration of a single session. It is not suitable for use by applications that need "headless" server-to-server, service-token, or long-running authentications.In Q1 2019 (coming very soon), Analytics will support JWT authentication for situations that require server-to-server, service...

2.5K

Re: How to get a new access token using refresh token - Adobe Analytics

Refresh token flow is not supported by Adobe Analytics V2 APIs under Adobe IO.In the context of Adobe Analytics, Adobe IO's oAuth authentication should be used by applications that authenticate a human user for the duration of a single session. It is not suitable for use by applications that need "headless" server-to-server, service-token, or long-running authenticaitons.In Q1 2019 (coming very soon), Analytics will support JWT authentication for situations that require server-to-server, service...

3.3K

Re: Last Access Feature - Experience Cloud - Adobe Analytics

Hi Keshav,The Last Access time will still be available in the Analytics Admin Console even after users begin logging in via Experience Cloud and legacy Analytics authentication is turned off. The Last Access time reflects the last time the user clicked into Analytics rather than the time they actually authenticated. This is because the authentication is done by Experience Cloud and users can move freely between Experience Cloud solutions without re-authenticating. Also available in the Analytics...

872