Hi Prateek,Thank you for your comments.We are creating new instances for every release, so the concept of 'apply once' and 'stays forever' wont apply for us. Looking into ways how we can create trust store (with predefined alias) through non-manual steps, so that we can put those steps as part of stack creation.Cheers,Veera

SAML | IDP Certificate through CURL Veera_kandregul - Adobe Experience Manager

Hi All,Am looking into options on how to configure SAML on our AEM instances, especially uploading truststore and keystore.From the documentation, we understand that we can go to admin console and manually upload the certificates, but they are manual steps and biggest issue is the truststore alias is random number which is restricting us to put SAML config in source control.Can you let us know if there is any other option to upload the truststore and keystore into AEM instances, say through CURL...

Re: SAML assertion value in logs Veera_kandregul - Adobe Experience Manager

Bumping this one again, can you guys let me know if there is any way?

Re: SAML assertion value in logs Veera_kandregul - Adobe Experience Manager

bumping up, any help ?

SAML assertion value in logs Veera_kandregul - Adobe Experience Manager

Hi All,We have a requirement to audit SAML requests in logs (say request.log or some custom log), where we need to show one of the SAML assertion value in the logs for every request.Can you please let me know if there there any OOTB or custom way to achieve this?Example, if below is the assertion value, test@example.com We need to log test@example.com in every request log.

Re: caching secure pages in AEM Veera_kandregul - Adobe Experience Manager

Hi Ravi,Following up on your question above, did you get chance to find solution to this problem?

Re: Polling analytics data to AEM Veera_kandregul - Adobe Experience Manager

Thank you kautuksahni, we are on AEM 6.2 unfortunately

Re: Polling analytics data to AEM Veera_kandregul - Adobe Experience Cloud

Thank you...Providing reference to thread where i got solution to the above question, please find below.-Polling analytics data to AEM

Polling analytics data to AEM Veera_kandregul - Adobe Experience Manager

Hi All,Need your expert advice here, we are planning to use 'page impressions' and 'content insight' features of AEM and we are looking into options to achieve the same.We are going through the documentation and understood that SiteCatalyst Framework can be used for the above purpose, but also it is mentioned that sitecatalyst framework will send tracking data to analytics, which we do not want as we are using DTM for that purpose.Can you please advice what are the options we have just to import...

Polling analytics data to AEM Veera_kandregul - Adobe Experience Cloud

Hi All,Need your expert advice here, we are planning to use 'page impressions' and 'content insight' features of AEM and we are looking into options to achieve the same.We are going through the documentation and understood that SiteCatalyst Framework can be used for the above purpose, but also it is mentioned that sitecatalyst framework will send tracking data to analytics, which we do not want as we are using DTM for that purpose. Can you please advice what are the options we have just to impor...

Re: Adobe target backup Veera_kandregul - Adobe Target

Thanks Parit Mittal,We are actively using Target with lot of campaigns, but now trying to integrate with AEM and do some testing creating experiences in AEM for Adobe Target. We need to make sure that 'sync' features from AEM to target will not delete/corrupt existing Target campaigns while testing, thats the reason we would like to create back up before experementing the integration.1) Is there any Adobe recommended approach for this testing?2) Is there any cost involved, if we need to request ...

Adobe target backup Veera_kandregul - Adobe Target

Hi Guys,Just wondering if there is anyway to do back up of Adobe Target (campaigns, mboxes, etc..) ?What is the backup/fall back strategy for Adobe Target?Please let me know.Thanks,Veera

Re: DTM integration proxy settings Veera_kandregul - Adobe Experience Manager

Hi Guys,If you are looking for solution for above issue, we need to use new org.apache.http.proxyconfigurator configuration for DTM.Below is the response from DTM development team.Note that between AEM 6.1 and AEM 6.2, the DTM code-base has been updated to use the new Apache HttpComponents instead of the legacy Apache Commons HttpClient which is EOL.This change requires an additional Proxy Configuration under /system/console/org.apache.http.proxyconfigurator.

Re: Associate Staging DTM on lower environments Veera_kandregul - Dynamic Tag Management

Thank you Parit and Jantzen,We already following the said custom approach but want to go away with that as it will work only if DTM team is centralised. Also, those changes needs to be done on every property and that may mean its prone to human error and misses.Anyway, It seems like there is no OOTB way to exclude lower environments to get PROD DTM scripts without customization. We will try to customize the DTM component /libs/cq/dtm/components/dynamictagmanagement to fix our problem. Thank you ...

Re: Associate Staging DTM on lower environments Veera_kandregul - Dynamic Tag Management

Thanks Jantzen,I am referring to the recommended integration using /etc/cloudservices/dynamictagmanagement/ and then using cloud config tab on page properties.When i looked into implementation code of these integrations, it is checking only if 'author' or 'wcmmode=disabled' but dont have any options to verify/configure the lower environments so that staging header will go into these environments. Below is the snippet from /libs/cq/dtm/components/dynamictagmanagement/dtm_include.jsp//We use produ...

Associate Staging DTM on lower environments Veera_kandregul - Dynamic Tag Management

Hi All,We are trying to use DTM integration framework to get header and footer code into our websites. We are successful in the integration and now looking into OOTB way to make sure that1) DEV/Staging/UAT author and publish instances (including PROD author) should use staging header and footer2) PROD publish instance should use prod header and footer snippets. Can you guys let me know if there is any OOTB way to achieve this, or do i need to do customizations based on runmodes?Thanks,Veera

Re: DTM integration proxy settings Veera_kandregul - Adobe Experience Manager

Hi Prince,yeah, i followed those links but no luck, we are getting same exception. Have you integrated DTM with AEM 6.2 over proxy?

Re: DTM integration proxy settings Veera_kandregul - Adobe Experience Manager

Any help here is much appreciated. 🙂

DTM integration proxy settings Veera_kandregul - Adobe Experience Manager

Hi,We are trying to integrate DTM with AEM 6.2 (service pack 1) but we are getting timeout issues.We got the proxy settings configuration under com.day.commons.httpclient and am able to connect to analytics server. So, we are assuming there are no issues with proxy settings. We debugged bit more, and found that the DTM is using org.apache.http.impl.client.CloseableHttpClient to get client connection. In earlier releases, it is using org.apache.commons.httpclient.HttpClient.(please check http://h...

API token for DTM Veera_kandregul - Dynamic Tag Management

Hi,I am not able to get API token from my DTM account, can you give me instructions to get one?EDIT: Removed personal information

API token for DTM Veera_kandregul - Dynamic Tag Management

Hi, I am not able to API token from my DTM account, can you give me instructions to get one? My client ID is Veera_Kandragula@amp.com.au

Re: Mapping XSD elements to custom form components Veera_kandregul - Adobe Experience Manager Forms

Thanks, i agree that we can use bind-ref but i would like to know how we can change mapping so that binding will be done automatically when we drag and drop from content finder. Cheers,Veearswami Kandregula

Mapping XSD elements to custom form components Veera_kandregul - Adobe Experience Manager Forms

Hi All,We are creating AEM form based on our XSD schema and we found that xsd schema elements (like xs:string, xs:date) are mapping beautifully to OOTB form components when dragging and dropping from content finder, ex:. xs:string to Text box components.https://helpx.adobe.com/aem-forms/6/adaptive-form-xml-schema-form-model.html#Using%20an%20XML%20schema%20as%20form%20modelCan you tell us how we can change this mapping so that XSD elements will get binded to our custom form components (say text-...

Re: Modify dialog field value after submit Veera_kandregul - Adobe Experience Manager

Thank you Scott, for your inputs.I am more interested to manipulate the data at the dialog level itself (like using cq:listeners like afteredit etc..) as they will be perfect place to act upon dialog data as soon as they get submitted.I can also try using Java side of the component, provided it will get triggered before dialog data is written to content/../jcr-content/.. node.Can you please point me to any classes in the JCR API i can use for this purpose?My requirement is to build multifield di...

Modify dialog field value after submit Veera_kandregul - Adobe Experience Manager

Hi All,We are trying to achieve multifield dialog using TouchUI dialog where there will be two fields say Title and Link, which are part of multifield. We would like to store these two values as : againist a property under appropriate content node after submission. Example:I have two dialog fields, say Title (with name as ./title) and Link (with name as ./link). Under normal dialog submission, the values will be stored in title and link properties. But i would like to get them stored under new p...

Likes from

User

Count

Guidelines

Cookie preferences