Hi, Thank you for the prompt response.Have you tested the sFTP using the
Adobe FTP account, i.e. ftp.omniture.com? I am not entirely sure what to
add as the hostname.From what i understand it will have to be:
sftp.omniture.com or sftp2.omniture.comPath: {{path of the
folder}}username: {{username}}I would then need to download the RSA
public key (available during setup) and store it on the Adobe FTP
account level (i.e. under the name of authorized_keys) as well as onto
my machines so i can connec...
Hi,I am hoping to get some help from you guys as I would like to use the
sFTP method for my data feeds.I do have an adobe ftp account (i.e.
ftp.omniture.com which is apparently sFTP ready).Would you guys be able
to provide me with direction for, hostname, DCA and RSA (available in
the UI during setup)?Thanks
Hi, Thank you for the info.I do have the PDF but nothing really
highlight best practice to look at data based on a segment as mentioned
in my previous comment.I was hoping to have some best practice which
will help get the data based on visitor or visits etc...Additionally, as
far as i have seen while setting up data feeds, there are no option to
apply a segment unless i am missing this option completely.Thanks
Hi,Thank you very much for you response.For the moment, it will be very
manual. FTP > extract and push into mysql (as I will start testing with
a day or 2 of data).I am thinking of using python to do the rest. As a
start I just want to understand what I need to do for building segments
as the Adobe PDF simply highlights the calculations for certain
metrics.I would really appreciate if you have any info / additional
resources or advise.Ideally, I would think that I would go towards
Hadoop and apa...
Hi all,I am currently using clickstream data to build my own reports /
visualization (as it is a piece of a bigger project) and was wondering
how to go about to analyze my data using segment.Is there a specific
approach to follow?Anyone who can help with the above?Thank you
pageBottom is to help DTM understand the loading of the page. However,
it will also help trigger your page view ( i.e. s.t() ).Adding it
multiple times, will constantly trigger a page view. I would rather use
the .track which will then help you call a direct call rule.I see that
you are using the clearVar function. FYI, see the latest notes
(AppMeasurement for JavaScript ) as Adobe has now introduced call backs
functions that will allow you to clear your
varss.registerPreTrackCallbacks.registerP...
Hi,Thank you for your help and i have been able to implement the
customer id via DTm. As an fYI, you would need to implement the customer
id via code when on an angular website. Anyone wanting more info, please
request and i will let share the details.ParitMittal I am encountering
an issue as i would like to persist my customer id across different
domains (i.e. with different extension .co.za vs .com). I cannot find a
way to set a cookie on assets.adobe.com nor demdex.Would you know what
can be...
Hi, I am not sure if this is on the roadmap but i have encountered
multiple clients now that cannot load DTM locally when their dev url
contains a port number. We cannot always go back to loading the DTM from
adobes server as it will not be a true representation of how it will
load live especially when dealing with angular js websites. Cross
fingers that this will be an option in the next release.
Hi, I am making use of the DTM library download which was intially a
pain as you could not specify a specific url as it assumes based on the
location i.e. //. DTM now automatically bring the domain host which is
great but i have noticed an issue especially when using different
staging environments which requrie a certain port number. It would great
if DTM can add the port number if available or just allow you to make
use of a data element. In my current situation i always need to override
that p...
Hi, I was wondering if DTM could include an option where a user could
choose to ask DTM to minimize any html and / or javascrit which is being
added thus allowing a boost in performance. This could be a great option
to enable only to affect the production environment.
Hi,Thank you for your reply. It has been now 2 days and still no email.
I really dont know why this is not working.Could it be related to a new
bug?My actions were try download the pdf multiple times. Keeps saying
that it is taking too long and offered me the option of sending it
instead which i have accpeted. Additionally, i have also (after a few
hours) try send the report. Still nothing.Thanks
I am struggling to download a report as i guess its size is quite big.I
confirmed to send it multiple times now and try the send now option.It
has been now an hour and still nothing. Is that expected?
Hi,I have been looking at the Anomaly detection and the contribution
analysis. Looks very cool and great tool to have, however:1. All the
help center resources are very outdated and not inline to the new UI and
way it works. Any idea as of when it will be updated?2. I also agree
with the contribution analysis being very confusing, especially when it
allows you to list the top 5. I constantly need to keep hiding elements
in order to display new ones. Looking at an anomaly based on a dip of
data i...
Hi Parit,Thank you for your response.I am on the latest Analytics
version 1.6.2 when running my tests and the s object is still only
accessible in the editor of the analytics section of a rule.It cannot be
accessed when inside a condition and / or within the custom javascript
part of the rule.Have you tried it on your side?Thanks
Hi,I was looking at the latest DTM webinar
(https://my.adobeconnect.com/p7y362elp19) and linked to you comment
above i don't really understand how the presenter was able to use
s.clearVars() in both the condition as well as in the custom javascript.
As far as i know i was never able to access the s object in both of
these section. s object is only accessible when using the editor under
the analytics tab / container of a rule.Would it be possible to confirm
if the above will be available in the n...
I finally had some time to test the latest feature released in DTM which
looked like a fantastic upgrade at first for users who arent making use
of AEM.My only issue and hence the reason why i will never use or even
recommend it is that you literally need to spend a LOT of time redoing
the data schema in the code editor. That can be very simple for a small
website and data layer but a nightmare when you deal with a much bigger
data source (even for flat structure object).I would therefore still
...
Hi,Using DTM for video tracking as explained above (i.e. using direct
calls), may i still have the correct data sent and have my video
reporting (considering that i have enabled video reporting in my report
suite) fulfilled?I would like to avoid using the media plugin and i did
notice that using the media plugin the image request contains linkType
(pe) as "m_s" or "m_i" and my linkUrl (pev3) is set to "video".Does that
matter?Thank youJerome
Hi Parit,Due to the document not mentioning how to do it in DTM i am
struggling for most of the afternoon.After login, the dataLayer is
updated but i do not see the details about my customer ID. As far as i
understand the details will be sent via the demdex request which happens
only once and only when the user do not have a visitor id set yet.Any
help? any documentation for DTM?appreciate any helpThank youjerome
Hi Parit,Thank you for your reply.Based on your email and should i go
ahead with the customer id persistence (i.e. cookie based so to handle
logged out pages) then in DTM i would set:1. (please see screenshot)Key:
loggedinuserid (or userid)data: from dataElement retrieving value from
the dataLayer while the user is logged inauthstate: Authenticated2.
(please see screenshot)Key: loggedoutuserid (or puuid)data: from cookie
based dataElement holding the value of the above only after logged
out.auth...
Hi Parit,Thank you very much for your reply. It now makes more sense in
terms of the implementation.I do see that the auth state in DTM is from
a drop down box which makes it difficult to associate it to the
customerid which i may persist while logged in vs logged out.What would
be the best approach to do it, please refer to the screenshot below?1.
customerid - dataElement being retrieved from dataLayer while logged in
and therefore have its authstate set to "Authenticated"2. customerid -
dataEl...
Hi,I am using DTM and currently deploying the Adobe visitor id service.
I am planning to parse the customer id very soon and would like to get
some advise on the best practice and how to do it in DTM.Would you
recommend using the JavaScript snippet or can i use the data elements
(i.e. setting user id, customer id, authstate for that particular
customer)?It is also mentioned on the help website that the customer IDs
and authentication states need to be parsed on every page. My issue is
that once ...
Hi Andrey,I am planning to parse the customer id very soon and would
like to get some advise from you as you have already done it in DTM.Can
i do the set up by only using data elements (i.e. setting user id,
authstate for that particular customer)? or will i require that piece of
javascript?I understand that puuid is used when you have multiple IDs,
are you the one generating that random string? can i just ignore that
puuid as i don't expect to have multiple ids?It is also mentioned on the
websi...
Hi,I have noticed a function call "setTagContainer" in the scode and was
wondering if anyone can shed some light on that method.Why should i use
and what purpose does it serve?ThanksJerome
Hi, I have noticed that the Direct call has a "bug" as variables which
are set on rules which trigger s.tl() persist and get tied up with my
direct call rule (i.e. to fire a s.t()). I have been battling trying to
find an effective solution to try keep only the variables which are set
on the template. The above can be very challenging especially for end
users who dont have any developer background. It would be great to have
DTM be more strict in terms of taking the variables which have been set
w...
Hi Danielle, Thank you for your comment and i am really glad that i am
not alone.I have encountered a loging screen many times after savings. I
woudl think that either as a default it automatically keeps you logged
in until you decide to signout or you as a user can increase your
timeout delay. PS: love how you describe your flow
Importing / exporting a container will be beneficial expecially to
enable users to replicate an account's container and avoid starting from
scratch again.
