Thanks Milan - I'll take another look at it. This report has some other
stats that are useful, but the reporting engine is very complex and
poorly documented
Check in AAM that the correct destination is applied to the segments
(based on Declared Id). Also make sure in Campaign you select the
correct datasource (Declared Id) when creating the segment.Also worth
checking the workflow that syncs shared audiences is working correctly
(importSharedAudience)
Hi @vkt1989 I followed this up a while ago with Adobe support and found
there is a workflow that can tell you how many active profiles are
present in the system. Look for workflow billingActiveContactCount. If
you run this and check the audit logs it will show you the current
active profile count.The count takes into account the links between the
log schema and the target schema and if there is no match to a recipient
(ie anonymous) then it uses the address field in the log schema to
determine t...
Hi @lucyb20459049 , The data_coding field tells you which encoding is
used. A major problem is that the value 0 means default SMSC encoding in
the specification, in general it means GSM7, but that's not always the
case. Check with the provider which encoding is associated with
data_coding = 0 (AC only supports GSM7 for data_coding = 0). Other
data_coding values tend to follow the specification, but the only way to
be sure is to check with the SMSC provider. Regards,Milan
Hi @tejashriw155148 , you must do a split after query selection to get
two branches (one for INT and another for STRING).After that you may
convert to preferred type in Enrichment nodes in needed (per branch.) If
your data have only two characters you may adapt query in split:To
identify numbers something like: first character in (1,2,3,4,5,6,7,8,9)
and second character in (1,2,3,4,5,6,7,8,9)To identify non-numbers just
enable Complement of point 1 to get all non-numbers Generally, with
provided...
Hi @tejashriw155148, you must do a split after query selection to get
two branches (one for INT and another for STRING).After that you may
convert to preferred type in Enrichment nodes in needed (per branch.) If
your data have only two characters you may adapt query in split:To
identify numbers something like: first character in (1,2,3,4,5,6,7,8,9)
and second character in (1,2,3,4,5,6,7,8,9)To identify non-numbers just
enable Complement of point 1 to get all non-numbers Generally, with
provided ...
Hi @nvt2 Is this what you are looking to do?
https://experienceleaguecommunities.adobe.com/t5/adobe-campaign-classic-questions/how-to-parse-vars-variables-to-the-segment-code/qaq-p/292530
@segmentCode is part of the workflow schema after the Cells or Split
activity, so you can always use an enrichment to modify its value based
on other fields in your data
Hi @stephenjwz Have a look into this sample code - it explains how to
select some records, modify some values and then write back to the
temporary schema:
https://technowide.net/2017/05/19/iterating-custom-functions-record/If
you have a lot of records i.e. > 10K, then you will need to page the
record set select/write operations:
https://experienceleaguecommunities.adobe.com/t5/adobe-campaign-classic-questions/advanced-workflow-data-enrichment/qaq-p/355955Note:
if you need to do recordset paging,...
Good know and I think you may be right as I was alerted by Adobe a few
days later that an endpoint had been compromised through the use of
personalized URLs (only affected less than a handful of people). Since
then we have worked with Adobe to mitigate the issue with following best
practices, whitelisting and some other measures we are waiting on Adobe
for. Thanks
Hi @Milan_Vucetic Generally, we have observed that the JS activity in
Adobe Campaign Classic only processed approx 9000 interactions and
throws error after that. To handle this concern rather than doing any
code-level changes we have used Test activity to check the count and the
split the count into the batches of 9000.
You are not in breach of any licencing agreements if you don't use it.I
would just leave it there.However if you must uninstall it and if this
is a live production server, I would just take an image before you
uninstall/remove it. That way you can always restore the system back to
exactly the way it was before you tried the uninstall.Uninstall steps
will be dependant on what OS you installed it on. JMC standalone you
don't actually install so you can just delete the folder it lives in.
JS would be for web app, question wasn't clear. For email you can only
use double-redirect, which would be a tracking redirect pointing to a
webpage consisting of a single tag.
With the Neolane and Daycare support moving over to Experience Cloud
portal on May 11, can you tell me if you have provided a way for users
to have access to the support portal without being an Experience Cloud
Admin?Right now to access the Support Portal you need full admin rights
to the Admin Console and this will lock out most of our Neolane support
users.Thanks
You should be able to have a dynamic Reply-To address in your delivery
and it shouldn't affect your IP reputation provided the reply-to address
has the same domain as the sending and bounce addresses.
@wodnickiposted up an alternate JS method here:
https://experienceleaguecommunities.adobe.com/t5/adobe-campaign-classic-questions/generate-mirror-url-for-export/qaq-p/327420Not
sure if that will be any quicker, but worth a shot
Have a look at the MTA config parameters. You might be working in SMTP
Relay mode:
https://docs.adobe.com/content/help/en/campaign-classic/using/installing-campaign-classic/appendices/the-server-configuration-file.html#mta
Hi @tejashriw155148 - If a target is not being allowed through then you
probably need to find out where they are being excluded from. It could
be blacklist, quarantine settings or another typology rule that is
excluding them. I don't believe you can create a typology rule to allow
a target if another rule or setting is excluding a target.
I got the same error with xtk.persist.Write() on 9032 and I couldn't get
xtk.session.Write() to work with templated variables and memo objects. I
ended up hacking a database insert together with sqlExec()
https://experienceleaguecommunities.adobe.com/t5/adobe-campaign-classic-questions/xtk-session-write-for-memo-element/qaq-p/356706
Yes it should - we use Personalization blocks in Subjects all the
timeDoes the same PB render in the body of the email? Could be a
permissions issueAlso check your audit log of the delivery to see if
anything strange pops up
formatDate() requires a Date object and in your additional data, date is
a string, which will generate that error. I would say your targetData
normally has an actual date object for effectiveDate which is why it
works when you run the workflow.
The lost instructions on how to make TraceViewer work are below.Note: to
get the application, just download any version of the server and unzip
it locally. It doesnt have to come from the actual server.1.) Open
TraceView application under \bin\tools
--> traceview.exe2.) Now go to the Campaign client instance where you
are working and press "Shift + F3"3.) Perform any activity on the
instance.4.) Now go back to TraceView tool and you'll see the SOAP data
coming in.Be aware TraceViewer app is in f...
Interestingly no - the resource URLs use another hostname (other than
the server) which we have added to the proxy auto-config, but the client
seems to bypass that when requesting the image resource URLs. The rest
of the requests seem to be proxied properly. As the image resources are
bveing queried outside of the proxy, the server security whitelisting
fails and we get a request error.
There is a GitHub project here with some examples:
https://github.com/cumpstey/campaign-syncSome other discussion here:
https://experienceleaguecommunities.adobe.com/t5/Adobe-Campaign-Standard/Source-Code-Management-with-Adobe-Campaign/qaq-p/176116
Hi @guillermoL - I havent actually done an implementation with AA/AC
direct except for POC where it seemed fairly straightforward. If you are
having issues with this method and decide on Triggers, it is not a small
effort to implement Triggers. There are a lot of moving parts to set up
and not much in the way of clear current documentation. However, once it
is set up, it seems to be fairly reliable. cheers
